I have a Neo I'm moving to a new helicopter, and would like to reset the flight characteristics back to default. Is there any way of resetting the Vbar Neo to default settings?
← VBar NEO for external transmitters
How to reset Vbar Neo translated
VBar › VBar NEO for external transmitters ·
Started by ronaldst on 19 March 2018 22:2719.03.2018 22:27
ronaldst
19 March 2018 22:2719.03.2018 22:27
Fingolf
19 March 2018 23:3819.03.2018 23:38
Do a new setup
Stephan
Stephan
Eddi E. aus G.
20 March 2018 08:4920.03.2018 08:49
Hi Ronald,
yes, Create New Setup writes factory defaults to the NEO.
Re-flashing the firmware wouldn't change a thing, though, I'm just writing this because some people think it would, but it leaves the parameters untouched.
Kind regards
Eddi
Born to fly ...
forced to work.
yes, Create New Setup writes factory defaults to the NEO.
Re-flashing the firmware wouldn't change a thing, though, I'm just writing this because some people think it would, but it leaves the parameters untouched.
Kind regards
Eddi
Born to fly ...
forced to work.
ronaldst
28 March 2018 01:2428.03.2018 01:24
I created a new setup and have gone through all the mechanical setups etc. Once the setup is done, I get into the parameters setup where I change style, agility, gyro gain, yaw rate and so on.
These settings are still from my old/other helicopter. These settings have not been reset to default values. How do I reset these back to default? They are so far out there (from my old heli) it's hard to figure out where to begin.
These settings are still from my old/other helicopter. These settings have not been reset to default values. How do I reset these back to default? They are so far out there (from my old heli) it's hard to figure out where to begin.
RV
28 March 2018 06:3128.03.2018 06:31
There is a simple trick:
Start the software in demo mode (see start menue in win) - and "create" a new model there. Open the "real" software too, now just compare ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Start the software in demo mode (see start menue in win) - and "create" a new model there. Open the "real" software too, now just compare ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.