← VBar NEO for external transmitters

Cyclic ring is active translated

VBar › VBar NEO for external transmitters · Started by sapfreak@me.com on 26 September 2018 10:5326.09.2018 10:53
sapfreak@me.com 26 September 2018 10:5326.09.2018 10:53
Hi,

My Diabolo 700 flies with Vbar Neo Vlink with Rescue.

After the last flight, the log shows warning message: "Cyclic Ring is Active".

I wonder why and what caused the warning.

Thank you,

Chris
Eddi E. aus G. 26 September 2018 10:5726.09.2018 10:57
Hi Chris,

if the VBar has to limit itself electronically, this message will come up.

Usually only on the ground, if you input say full elevator or full aileron or both, the model does not move, the VBar increases the output.

If it happens in flight, the model can not follow your inputs, say agility is set too high and the model is at it's physical limits (can not generate higher roll or elevator rates).

But you have to put it into perspective, when did it appear during a flight, what else is there.

So please attach the whole log file and we can possibly tell more.

Kind regards

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless