← VBar NEO for external transmitters

Vbar Neo DX8 Collective Curve translated

VBar › VBar NEO for external transmitters · Started by Mark Norris on 23 October 2018 20:3023.10.2018 20:30
Mark Norris 23 October 2018 20:3023.10.2018 20:30
Hello,
I have my Vbar Neo flying very well now and I'm looking for some fine tuning advice. Any help is greatly appreciated.

Currently I have the following banks setup and working as expected

Bank 1 - Direct throttle mode, can manually spool up without issue. Mid stick headspeed blends nicely with Bank2 GOV rpm.
Bank 2 - All setting same as Bank 1 but with nitro governor set to control @1700rpm, works great.
Bank 3 - All setting same as Bank 1& 2 but with nitro governor set to control @1900rpm, works great.

Currently all 3 banks have full +/- 13 degree pitch.

My question is: Using a non vcontrol; How can I keep my direct throttle in bank 1 working as expected while modifying the collective to be -5 to +10 for more scale flying.

Thanks
Mark Norris
RV 23 October 2018 20:5423.10.2018 20:54
Our throttle settings are related to a symmetrical collective. On a 3rd party radio you can dial in collective curve as you like - but then it will not start at idle with "stick down" in Bank1 anymore. It will do a throttle jump to somewhere between Idle and Basic throttle when flipping the switch to run.

I would try if it is too much - and probably do a compromise and start at -7 deg or so.

Having a VBar Control touch - there is a app for editing a 7-point curve with the macrocells in a NEO ;-) So if you have a Vlink or can add a VBar Sat and someone has a VBC-t ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Mark Norris 26 October 2018 18:4026.10.2018 18:40
He Rainer,
Thanks for all you great help. By the way I love your video below, lot's of nice toys.

https://www.youtube.com/watch?v=-WAQ24S0TJM

Mark
RV 26 October 2018 21:0726.10.2018 21:07
:-) :-) :-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Mark Norris 26 November 2018 19:0026.11.2018 19:00
Hello again Rainer,
This weekend I finally tried changing my pitch curve.

Normal pitch curve before any changes was 0 - 50 - 100, This results in +/- 13.5 degrees pitch

After modifying 10 - 50 - 90, This results in +/- 10 degrees pitch.

Upper throttle was unaffected and still went to full open, lower throttle would not go to zero unless I reduced the idle to zero and AR idle to zero. All seemed to work well except when AR idle switch set the idle would close all the way and shotoff the engine.

I found no way to have idle and AR idle to be the same, if both values are set to zero there is still a difference, probably because the neo isn't really at idle when the stick is low.

Is it possible to use AUX 3 for throttle with curves and still use the governor function?

If no other way then perhaps I have to purchase the Vcontrol.

Thanks
RV 26 November 2018 21:0726.11.2018 21:07
Quote:except when AR idle switch set the idle would close all the way and shotoff the engine.

Hmm - this should not happen.

Probabyl a assignment issue? - E.g. does the "AR" also set the "Kill" Switch? - Please check in RC Chhannels display.


Quote:because the neo isn't really at idle when the stick is low.

NEO is at idle in the "manual bank" when stick is low AND we get -100% collective stick signal. If you changed with curve e.g. to -95% here - no idle ...


Quote:Is it possible to use AUX 3 for throttle with curves and still use the governor function?

No, this isn't possible


Quote:If no other way then perhaps I have to purchase the Vcontrol.

NEO is mainly developed for use with VBC or VBC-t. We made possible what we can do for 3rd party radios - but unfortunately there are some limits.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Mark Norris 27 November 2018 00:1427.11.2018 00:14
Hi Rainer,
I've just ordered a Mikado VBar VControl Touch Radio (Blue). I've also ordered the Mikado Vbar Neo to Neo Vlink Conversion Set, as well as online purchase the vlink option. I can't wait to use all the functionality of the system.
I appreciate all your help.

Thanks
RV 27 November 2018 19:0327.11.2018 19:03
Well done - thanks!

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Mark Norris 28 November 2018 23:1828.11.2018 23:18
Hi Rainer,
I've received my VControl and updated my NEO, everything is working as it was after performing a new setup.

My question now is - I would like to use special throttle curves for bank 1, do I load the app "Special Throttle Curve (Nitro)".

Basically I would like Bank 2 and 3 to be governed but bank 1 have a throttle curve.

I'm also slightly confused regarding pitch curves. If I change the pitch curves in the radio do I risk having settings too small, I remember this statement from the PC software-

Adjust now the overall collective throw at full stick positions. It is recommended that 12-14° should be reached within 80-100 points here. This will get useful ranges for our control loops.

If I lower the pitch min and max curve above or below 80-100 will I have issues?

Mark



1 mal bearbeitet. Zuletzt am 28.11.2018 23:22 von Mark Norris.
RV 29 November 2018 08:0829.11.2018 08:08
Just change the pitch curves in VBC as needed. Flying the modle later (if needed) with another radio - don't use curves there because the already set up curves in NEO (by VBC) are in use.

The "over all" pitch value in the setup just sets linear curves with this endpoints. So altering in the "banked curves" is the same point where the values are changed but more flexible.

Quote:Adjust now the overall collective throw at full stick positions. It is recommended that 12-14° should be reached within 80-100 points here. This will get useful ranges for our control loops.

Well - this is a thing which depends on the geometry of the heli. Having low numbers you might loose a little precision and force on the servo horns. But with todays servos this isnt "that" important - but still present. How much is your number for 12 deg collective and 8 deg cyclic?

The special throttle curves are "general". So there is no way to set up 2 of them for non-Gov. You just can use one bank (works with usual 3-point curve or special curve) of them for non-gov as set up in the nitro settings.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Mark Norris 30 November 2018 04:3430.11.2018 04:34
Hello Rainer,
My current values for +/-12 degrees pitch are 75 for low and 75 for high. My current values for 8 degrees cyclic is also 75.

I think these are probably OK as they are very close to 80.

Another question is - Is it OK to adjust the collective curves in the flight parameter menu to lower than 75 on the low side to get my negative pitch in bank 1 to be around -5 degrees.

Thanks for helping answer all my questions, I appreciate it very much.

Mark
Eddi E. aus G. 30 November 2018 09:3430.11.2018 09:34
Hi Mark,

75 is OK, close enough, good enough.

For collective, the settings in the Model Setup define a first global adjustment (means straight 'curves' :-) with the set end points, for all Banks).

You can adjust the curves per Bank afterwards, any way you like, also the end points, just mind that if you ever set the end points in the setup again, it will overwrite your individual curves/end points again.

Kind regards

Eddi

Born to fly ...
forced to work.



2 mal bearbeitet. Zuletzt am 30.11.2018 09:34 von Eddi E. aus G..
Mark Norris 30 November 2018 18:0730.11.2018 18:07
Hi Rainer,
Thanks for the info. I understand completely, I love my new setup with the neo and Vtouch.

Mark
VStabi VStabi Pioneer of Flybarless