← VBar NEO for external transmitters

V1 or V2 translated

VBar › VBar NEO for external transmitters · Started by Vinger on 9 January 2019 10:0909.01.2019 10:09
Vinger 9 January 2019 10:0909.01.2019 10:09
How does one differentiate between V1 and V2 non Vlink Neo, plus which version can be upgraded to full Vlink and what is required?

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
Eddi E. aus G. 9 January 2019 10:2809.01.2019 10:28
Hi,

please see http://shop.mikado-heli.de/VBar-Electronics/VBar-NEO-VBasic-Receiver/VBar-NEO/Conversion-Kit-VBar-NEO-to-VBar-NEO-VLink.htm?shop=k_mikado_e&SessionId=&a=article&ProdNr=05062&t=7568&c=8036&p=8036

and http://shop.mikado-heli.de/VBar-Electronics/VBar-NEO-VBasic-Receiver/VBar-NEO-Software.htm?shop=k_mikado_e&SessionId=&a=catalog&t=7568&c=8039&p=8039

Best,

Eddi

Born to fly ...
forced to work.
Vinger 10 January 2019 04:1510.01.2019 04:15
thks Eddie, so no way of knowing before opening the box if it is V1 or V2?

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
Eddi E. aus G. 10 January 2019 09:4510.01.2019 09:45
Hi,

well, if you buy a VBar NEO now, it will almost certainly be a V2. VBar NEOs have never been non-sellers, so I doubt there are V1 around any more—new in box.
Otherwise, you would check the serial no. in your device list (addendum VLink or non VLink = V2, no addendum = V1).

V2 is around since Q3 2016 already ;-)

Kind regards

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless