← VBar NEO for external transmitters

Neo log file error message help translated

VBar › VBar NEO for external transmitters · Started by Ianflorio on 16 January 2019 14:1316.01.2019 14:13
Ianflorio 16 January 2019 14:1316.01.2019 14:13
Hi,
I recently crashed my helicopter and on looking at the log file saw the following error message "Aileron Sensor Value out of range"

This is fitted to an electric helicopter.

Please can you advise what I need to do? does the unit require a service/inspection by your technical dept, is there a vibration I need to find and clear? etc

Thanks in advance

Ian
Eddi E. aus G. 16 January 2019 15:3616.01.2019 15:36
Hi Ian,

said message occurs if the sensors sustain a shock impact, e.g. in a crash or if you move the VBar very briskly.

They serve as a marker, most of the time.

In normal operation, they shall not occur, or vibration would be so hight that the sensors would also go out of range.

Usually a VBar is tough, so if i works properly again, maybe in a new case if it was damaged or if the closing tabs were broken, all is well.
If in doubt, create a service request at www.vstabi.info/devices and we can check your unit, no problem.

Kind regards

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless