← VBar NEO for external transmitters

3 Bladed head and tail gain suggestions translated

VBar › VBar NEO for external transmitters · Started by ncarbon on 23 January 2019 05:3023.01.2019 05:30
ncarbon 23 January 2019 05:3023.01.2019 05:30
I put the 3 Bladed head and tail on my Align 700x. Just curious if some one has gains to share. I have read drop the cyclic by 30% and some say 60%..... Any experience I can benefit from?

Thank you

Ned
busterboy 23 January 2019 08:3223.01.2019 08:32
ncarbon Wrote:
-------------------------------------------------------
> I put the 3 Bladed head and tail on my Align 700x.
> Just curious if some one has gains to share. I
> have read drop the cyclic by 30% and some say
> 60%..... Any experience I can benefit from?
>
> Thank you
>
> Ned

Kyle Stacy recommends dropping the head gain down to 35% from the default 70% - 75%

Did that with my Goblin 700 and it fly's with no ill affects.

Too high and it starts to porpoise in fast forward flight.

Its a case of trying with your Align and see how it goes but certainly reduce rather than lift the gain.
VStabi VStabi Pioneer of Flybarless