RDouro
12 September 2018 19:5012.09.2018 19:50
Hello ,
Witch ubec recommendto connect vbar neon vlink ?
exemple : ubec3A ?
Regards
Paulo
RV
12 September 2018 19:5912.09.2018 19:59
Well - this should be asked to the servo and bec manufacturers in cooperation because a VBar consumes approx. 150 mA only. - But the servos have a way higher consumption in a direction change - and some ones do have reverse current who may have effects on the BEC or Receivers.
We did some tests in the past and so this is the result ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 12.09.2018 20:01 von RV.
RDouro
12 September 2018 22:0912.09.2018 22:09
hello,
ok i i use mini servo KST in goblin 380 you recommend to use ubec 3A ?
Regards,
Paulo
Eddi E. aus G.
13 September 2018 08:5313.09.2018 08:53
Hi Paulo,
I'm sorry but that can not be told easily.
Which type are the servos exactly? A Data Sheet from KST I found states—depending on the required torque—amperages of over 1 A per Servo.
But this is only the load amperage, it does not reflect short-time peak current draw e.g. during reversal of direction, where much higher currents might be drawn.
3 A sounds pretty weak to me, even for mini servos. We did measure values of 16+ A on standard servos (and not the most powerful ones), so if the mini servo would only draw 10 % of it, you would still be way beyond what the BEC can handle.
I would ask the servo manufacturer what he would recommend _for a safe operation_ or see what other G380 pilots use (and safely).
Kind regards
Eddi
Born to fly ...
forced to work.
hatos77
24 January 2019 10:3724.01.2019 10:37
ciao scusami ho un problema che e da un paio di giorni che mi accade,accendo il modello in piano,e non si inizzializza,rimane la spia accesa lampeggiante viola e verde,mentre faccio hovering con la spia verde,il modello al raggiungimento dei giri,da da solo alettone destro...
come mai?
hatos77
24 January 2019 10:3924.01.2019 10:39
sono disperato e non so a chi chiedere...
Eddi E. aus G.
24 January 2019 11:5424.01.2019 11:54
Ciao,
per favore non scrivere più volte, per lo stesso problema. Continueremo nel tuo altro thread.
Saluti
Eddi
Born to fly ...
forced to work.