← VBar NEO for external transmitters

How to save Neo non V-link setup files to my computer properly ?

VBar › VBar NEO for external transmitters · Started by caljr2tf6 on 26 January 2019 19:4926.01.2019 19:49
caljr2tf6 26 January 2019 19:4926.01.2019 19:49
I have Windows 10 on my computer,have downloaded Vbar Control Manager & VSabi Neo ,when I save setup file it does not give it an extention like .vbr ; had to give it .vbr extention to send it to you. It still wont open properly. Also PDF log files wont open correctly, it wouldn't allow me to send it to you. Did I download Vbar Control Manager improperly or could I have something wrong with my computer
Thanks Dateianhänge:
öffnen | Download - Test.vbr (2.3 KB)
RV 26 January 2019 20:0226.01.2019 20:02
The Setups are just binary files w/o any ending.

To read them open pc software in simulation mode and load it.

The logs are plain text files ... just add .txt

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
caljr2tf6 27 January 2019 23:3427.01.2019 23:34
Thank you, that worked

But I still wont be able to send files

Also why is this thread not shown on #1 page , had to do a search to find it ; this is my first time with thread
RV 28 January 2019 06:1328.01.2019 06:13
If you want to attach a file here - you can zip it before (setup file). A Log can be zipped to (probably both into one zip archive) - or also jus copy the content and paste it here with the "Quote" function.

Your thread has been moved to the right forum as you can see. It was in V5 which is the legacy VBar Forum - and so i moved it to the right one for 3rd party radio users and NEO.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
caljr2tf6 28 January 2019 18:2828.01.2019 18:28
Thankyou for returning my inquiry promptly & answering my questions and setting me straight .

Have new question . Don't know If I post here or start another thread

On V Control ; can different models be stored in transmitter and can it be used to back up settings also

Thankyou
Calvin
RV 28 January 2019 18:3628.01.2019 18:36
Of course - you can load them back to the VBars as you need. Please consider that Macrocells on a NEO must be saved/loaded seperately if used - there is a dialog in the Macorcells menue.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G. 29 January 2019 09:1029.01.2019 09:10
Hi,

and a word from the wise: do not try and load a log file into the VBar, using the VBar Setup Software.
Already had customers who did, thinking they could read it there, then, but it will only overwrite the setup so you will have to start over ;-)

Already had customers sending in their VBars, reporting it did not work any more 'after loading a setup' ...

Kind regards

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless