← VBar NEO for external transmitters

DX8 setup question translated

VBar › VBar NEO for external transmitters · Started by Larry227 on 3 August 2015 03:0803.08.2015 03:08
Larry227 3 August 2015 03:0803.08.2015 03:08
I have another question about the DX8 setup. According to the guide you set the Gyro in the radio to -100/+100 on the Gear channel using the Mix switch.
What exactly does this do? What would happen if you flipped the Mix switch in flight?

I have two Neos now working great with my DX8 using the settings provided. I'm just curious about this one setting.

Also want to say great job on the Neos. They were worth the wait.
RV 3 August 2015 12:4103.08.2015 12:41
It is the throttle Cut for Nitros ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Larry227 3 August 2015 17:4203.08.2015 17:42
Excellent. Thank you.
sbrabik 5 June 2019 08:3105.06.2019 08:31
Larry227 schrieb:
-------------------------------------------------------
> Excellent. Thank you.
VStabi VStabi Pioneer of Flybarless