← VBar NEO for external transmitters

Neo Pro Rescue and Jr DSX 9 translated

VBar › VBar NEO for external transmitters · Started by Vinger on 6 June 2019 17:4506.06.2019 17:45
Vinger 6 June 2019 17:4506.06.2019 17:45
As the search function does not work I cannot get any info re the use of a JR DSX9 transmitter with a Neo.

Have tried to mimic the tx settings for Spektrum radios but the trainer switch on the DSX9 cannot be mapped to any channel. At least got the three throttle curves to mimic bank switching, MOTOR switch is set via AUX channel and all work as it should.

Any idea on how to get the RESCUE to work even if it is on a two position switch.

The radio is bound to a Spektrum sat on DSMx

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
RV 6 June 2019 18:3006.06.2019 18:30
You just have to set up the regarding "Channel" sending us "center" in non-rescue position. In rescue start position it must send full deflection (see PC Software).

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Vinger 8 June 2019 05:1208.06.2019 05:12
Got it working for him, need to bind with DSM2 and the channels was correct.

Cheers

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
VStabi VStabi Pioneer of Flybarless