← VBar NEO for external transmitters

vbar neon vlink with receiver futaba translated

VBar › VBar NEO for external transmitters · Started by RDouro on 19 June 2019 15:0519.06.2019 15:05
RDouro 19 June 2019 15:0519.06.2019 15:05
hello
when i use futaba 14sg and receiver futaba r7008b with vbar neon vlink the configuration fail safei need config same key ?


Tank you !
Eddi E. aus G. 19 June 2019 15:0919.06.2019 15:09
Hello,

you mean the same switch?

No, you can assign one switch on VBar Control, as the Rescue switch, and you can assign a channel (switch) on your Futaba radio.
The switch can be a different one.

Kind regards

Eddi

Born to fly ...
forced to work.
RDouro 19 June 2019 16:5719.06.2019 16:57
hello

ok in these case can i assign sh switch ?



Regards,

Paulo
RV 20 June 2019 00:4320.06.2019 00:43
Well - just assign according to your radio manual to a channel. This may be probably directly, probably through a mixer or so.


I had a T8 as Futaba example here:
https://www.vstabi.info/en/node/1946

Please take note that we need "center" of the channel as default value before triggering a rescue. Check with the bar for the rescue channel in pc ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless