← VBar NEO for external transmitters

Scorpion tribunus will not talk to v control translated

VBar › VBar NEO for external transmitters · Started by trexian on 13 December 2019 16:2513.12.2019 16:25
trexian 13 December 2019 16:2513.12.2019 16:25
Scorpion tribunus will not talk to v control

I have connected it according to the instructions and made a lead to connect the pc port to the TEL1 on the NEO, i have installed the app on the TX and enabled it. i have pluged the esc in to the laptop and it is set to VBAR but it wont work.

Any help welcome

Thanks
RV 13 December 2019 21:0113.12.2019 21:01
Is all hooked up correctly? Most issues are in case of wrong polarity at the Telemetry plug in the ESC ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
trexian 17 December 2019 14:3417.12.2019 14:34
Hi

I have resolved the issue. this was a change of ESC. I needed to start a new model from fresh overwriting the old one and this resolved the issue. I then tried to reinstall my old settings from file and it stopped working again, so the problem was a setting in the NEO.

Ian
VStabi VStabi Pioneer of Flybarless