← VBar NEO for external transmitters

Vstabi NEO GUI translated

VBar › VBar NEO for external transmitters · Started by Razmo on 6 April 2020 02:0806.04.2020 02:08
Razmo 6 April 2020 02:0806.04.2020 02:08
I've purchased a NEO and installed the VStabi software for the NEO on my Laptop running windows 8.1 64bit. I have the same problem I've had with v5.3. That is, the GUI doesn't allow me to enlarge the box, which I thought I read was rectified with v6 software. Basically, the GUI is too small, cutting off information I need to see during setup. How can this be cured with v6?

Thank You,
Raz
RV 6 April 2020 09:0106.04.2020 09:01
https://www.vstabi.info/en/node/1961#12

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G. 6 April 2020 09:3106.04.2020 09:31
Hi,

not sure if it's already available in Win 8.x but in Win 10 I saw in the context menu (right click, properties) a panel where you can adjust the behaviour, for legacy Apps, how they shall be displayed.

Might be an other option.

Kind regards

Eddi

Born to fly ...
forced to work.
Razmo 7 April 2020 04:2907.04.2020 04:29
Rainer,

I deleted my icon from my desktop or capable of restoring it as I clear out my trash daily. Is there a way to recreate a desktop icon?

Thanks,
Raz
Fingolf 7 April 2020 06:3007.04.2020 06:30
Search the install directory and creste a new shorthut.

Stephan
RV 7 April 2020 08:1707.04.2020 08:17
Stephan,

this won't work.


He can add it again by doing a simple re-install as best option.

Or ..

In Windows Programs (Windows Key, search at "V&quot ;-) right click on the NEO Icon, open folder, copy the link there to desktop.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 07.04.2020 08:20 von RV.
Fingolf 7 April 2020 09:1707.04.2020 09:17
So meinte ich das auch @Rainer.
Razmo 8 April 2020 03:0808.04.2020 03:08
Rainer,

I reinstalled then added -e2 at the end of the target.. However, the program won't open after adding -e2.. Do I have something wrong here? See the following..

"C:\Program Files (x86)\VBarControl\jre\bin\javaw.exe" -Xmx200M -jar "C:\Program Files (x86)\VBarControl\VStabiShell61o.jar" -c config_62 -n-e2

Thanks,
Raz
Eddi E. aus G. 8 April 2020 09:0308.04.2020 09:03
Hi Raz,

please separate -e2 by a blank, as mentioned in the FAQ (it would read -n -e2 _not_ -n-e2).

Kind regards

Eddi

Born to fly ...
forced to work.
Razmo 9 April 2020 04:3909.04.2020 04:39
Ahh, thank you. Works perfect!

Raz
VStabi VStabi Pioneer of Flybarless