← VBar NEO for external transmitters

excessive vibration at 125Hz translated

VBar › VBar NEO for external transmitters · Started by ReadyToFly on 10 June 2020 22:4310.06.2020 22:43
ReadyToFly 10 June 2020 22:4310.06.2020 22:43
Hello guys,
My Logo 600 is experiencing extreme vibrations at 125hz or so.
The spike is so high, it goes off the Y axis on the VControl vibration analyzer screen.
The vibration can easily be at 150hz (I can't say fo sure - the scale won't tell me) and that would correspond to the tail rotor, correct?
I do not think I have a problem on the tail, but maybe on the pulleys.
Is it possible that slightly oval pulleys are producing this vibration at 125-150hz? If not, what else could it be?
I am pretty sure the strong noise I hear comes from the frame.
Thanks.



2 mal bearbeitet. Zuletzt am 10.06.2020 22:51 von ReadyToFly.
RV 10 June 2020 23:4510.06.2020 23:45
When you run the heli on the bench - w/o tail blades - is it still there?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless