← VBar NEO for external transmitters

Calibration Error!!! translated

VBar › VBar NEO for external transmitters · Started by Chippie13 on 27 June 2020 12:5927.06.2020 12:59
Chippie13 27 June 2020 12:5927.06.2020 12:59
When I setup my NEO and go to the Setup - Swash - Doctor's hat tab and click "Calibrate Horizontal Position" it does a restart of the NEO and then shows

Calibration Error!!!
Check Event Log!!!

I have tried everything but it does not seem to work. Any suggestions?

The NEO rescue works but its not perfect and I thought calibrating it would get it to level more accurately but this error prevents me from getting it calibrated.

The event log shows 88 - Horizontal calibration error

RV 27 June 2020 13:4627.06.2020 13:46
Okay - in this case please file a service request by clicking on the Service icon at this NEO in your list here. It would be best not to use rescue unless the issue is solved.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Chippie13 27 June 2020 14:1227.06.2020 14:12
Thanks for the quick response I appreciate it!!

Going to file the service request as suggested.
VStabi VStabi Pioneer of Flybarless