Hello guys,
I think I have a unique situation here.
I want to fly my vbar neo with my futaba radio, running an external governor. I few years ago I took some notes that I had to connect the ESC to Neo aux3 in order to do that. Is that correct?
To make things a little more complicated, at the same time I also want to have the Neo connected to a vbar satellite so I can easily adjust the settings in the field with Vcontrol.
Summing up, I would have Neo connected to a Vbar satellite and also to a Futaba Sbus RX simultaneously. I'd fly the heli with my futaba radio, but I'd adjust some settings parameters in the field with Vcontrol.
The problem is that I have aux3 taken by the esc wire (I'm running an external governor on my futaba). So, I can't connect the vbar satellite to the Neo.
Can I used a "Y" lead to have both the ESC and the satellite wires connected to aux3?
Thanks.
1 mal bearbeitet. Zuletzt am 04.07.2020 17:15 von ReadyToFly.
I think I have a unique situation here.
I want to fly my vbar neo with my futaba radio, running an external governor. I few years ago I took some notes that I had to connect the ESC to Neo aux3 in order to do that. Is that correct?
To make things a little more complicated, at the same time I also want to have the Neo connected to a vbar satellite so I can easily adjust the settings in the field with Vcontrol.
Summing up, I would have Neo connected to a Vbar satellite and also to a Futaba Sbus RX simultaneously. I'd fly the heli with my futaba radio, but I'd adjust some settings parameters in the field with Vcontrol.
The problem is that I have aux3 taken by the esc wire (I'm running an external governor on my futaba). So, I can't connect the vbar satellite to the Neo.
Can I used a "Y" lead to have both the ESC and the satellite wires connected to aux3?
Thanks.
1 mal bearbeitet. Zuletzt am 04.07.2020 17:15 von ReadyToFly.