← VBar NEO for external transmitters

trex6600nt nitro with futaba t10j set for gov translated

VBar › VBar NEO for external transmitters · Started by iantrex600nt on 12 July 2020 10:3812.07.2020 10:38
iantrex600nt 12 July 2020 10:3812.07.2020 10:38
hi there just cant get my head around the throttle set up at all, use to old school.
i know i need to set up the throttle on aux3 on a switch for vbar logic or aux3 on throttle channel (old school curves)
when i go to reciever page with the channel numbers there is no aux3 , how do i get aux3 to work with futaba radio.
its prossibly something simple that i am missing.
any info on set up for gov would be great
thanks ian kennedy
RV 13 July 2020 00:1413.07.2020 00:14
It is there here on mine.

Can you please post a screnshot?

Did you start with "new model" once?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
iantrex600nt 13 July 2020 17:3713.07.2020 17:37
sorry my mistake its here on mine , do i set up aux 3 to a switch which would be off/idle/run, what channel would i set to motor to would it be channel 3 for throttle ?
i am still trying to get my head round how this works, i have the bank switch to channel 5 which works on the main screen for the different head speeds.? thanks for your reply .
RV 13 July 2020 19:4413.07.2020 19:44
Sorry - i can't help you in another way then saying "Program it as i did in my T8 example", use VBar Governor.
I never had a T10 - and it is hard to follow your thoughts here.

I have added my last 2 Videos here, probably helps:
https://www.vstabi.info/en/neo_transmitter

To make it easy - use a VBar Control or VBar Control touch.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
iantrex600nt 13 July 2020 20:5913.07.2020 20:59
thanks for the video its all working now. will do testing now at the flying club.
thank you Rainer
VStabi VStabi Pioneer of Flybarless