luckyhs
19 November 2020 13:3219.11.2020 13:32
Hi guys,
i'm making a setup for a friend of mine, but i have an doubt, he has the futaba 16sz with rx
R7003sb, SBUS2, can i use this receiver with sbus2 to fly? i saw some guys saying that sbus2 can't be use with the vbar neo, only sbus.
i want know if i can use or not use with sbus2 and why?
Thanks a lot
Luciano
Eddi E. aus G.
19 November 2020 14:0819.11.2020 14:08
Hi Luciano,
you can use this RX but set to S.BUS.
S.BUS2 = S.BUS + Telemetry (longer data packet). The VBar only recognizes the S.BUS part. Control would still be safe, as far as we know, fortunately Futaba appended what comes then, leaving the original structure of the beginning of the data packet alone, but the VBar also logs an error each time, making the log unusable (full with those errors).
If you have S.BUS2 items on the model, you can probably still use those, just make sure the NEO runs off an S.BUS output.
Kind regards
Eddi
Born to fly ...
forced to work.
luckyhs
19 November 2020 15:0419.11.2020 15:04
Hi Eddi,
This receiver only works with sbus2, how can i setup only sbus on the vbar neo?
Eddi E. aus G.
19 November 2020 16:2219.11.2020 16:22
Hi,
I beg to differ, or at least the manual does.
VBar can not do S.BUS2, and why should it? We can not handle Futaba telemetry data anyway.
Kind regards
Eddi
Born to fly ...
forced to work.
Rolf
19 November 2020 19:4219.11.2020 19:42
On the German Manual of the R7003sb they Wrote that Port1 is SBus.
Sorry for my Bad English.
1 mal bearbeitet. Zuletzt am 19.11.2020 19:45 von Rolf.
luckyhs
20 November 2020 02:5020.11.2020 02:50
Thanks a lot guys, i’m gonna try and let you know.
Luciano