← VBar NEO for external transmitters

SETUP FUTABA 16SZ with VBAR NEO? translated

VBar › VBar NEO for external transmitters · Started by luckyhs on 30 November 2020 16:0330.11.2020 16:03
luckyhs 30 November 2020 16:0330.11.2020 16:03
Hi guys,
Can anybody help me on setup futaba 16sz with vbar neo, i can't figure the bankswith, rescue and motor on and off, i saw an video from futaba t8 from vstabi but it doesn't work on futaba 16sz, if anybody have an instructional video or file that could help me on setting up i'll appreciatte.
Thanks a lot
Luciano
Eddi E. aus G. 30 November 2020 16:3130.11.2020 16:31
Hello Luciano,

in the end, it's all in your radio's extensive manual.

The four control channels are simple, then, we need 2-3 more switching channels to actuate motor, bank and Rescue.

If you can assign an input to a channel #, to control a servo, you can assign a channel to actuate a function in the VBar :-) and you see directly in the setup software what happens (moving bar/status change).

Best,

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless