← VBar NEO for external transmitters

The device manager does not see the Vibar.

VBar › VBar NEO for external transmitters · Started by phangan on 3 March 2021 17:1203.03.2021 17:12
phangan 3 March 2021 17:1203.03.2021 17:12
When connected my VBar to the new computer Windows 10 (using the US 8-) message “new hardware found” does not appear.

Also the Device Manager does not show that a new device has been connected. Of the four laptops tested, only 1 saw the VBar as a new device.


How to solve this problem? Thank!
phangan 4 March 2021 04:1304.03.2021 04:13
Problem solved! Use only the original cable provided by the manufacturer!

Before that, I used a cable from another manufacturer for a long time, as it was more flexible. But after several years of use, it apparently got damaged.
Replacing it with the original cable led to a solution to this problem.

I apologize for disturbing you and wish you all the best!
RV 4 March 2021 08:5704.03.2021 08:57
:-) :-) :-) :-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless