← VBar NEO for external transmitters

Convert Non-Vlink to Vlink translated

VBar › VBar NEO for external transmitters · Started by Jock_rst on 26 October 2021 05:5326.10.2021 05:53
Jock_rst 26 October 2021 05:5326.10.2021 05:53
Hi,

My friend is using Non Vlink Neo version with Spektrum satellites. We want to convert Neo to the VLink version by using conversion kit for possibility to easy and fast adjustments from my VBCt radio.

I have a couple questions:

1) We need to update Neo NonVlink to Neo Vlink and unclock receiver functionality via special app.
How to do it? Until the Neo have no receiver functionality i can't bind it to my VBCt radio. Is it possible to update via USB cable by purchasing special update App from my friend vstabi account?

2) After we will get Vlink version there will be two Neo antennas and two Spektrum satellites connected. So, i will can to bind friend's Neo to my radio and fly / adjust his heli without any issues?
RV 26 October 2021 06:0226.10.2021 06:02
1 - yes of course
2 - yes, but for assigning channels of 3rd party radios with a VBC/VBCt a Pro is required as well as Macrocell Apps loaded

Note: You won't have a VBC Telemetry then (Ports and Interface used for Spektrum) - but can be enablel later by resetting the 3rd party protocol.

https://www.vstabi.info/en/add_vlink
https://www.vstabi.info/en/node/2095

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Jock_rst 26 October 2021 06:1126.10.2021 06:11
RV schrieb:
-------------------------------------------------------
> 1 - yes of course
> 2 - yes, but for assigning channels of 3rd party
> radios with a VBC/VBCt a Pro is required as well
> as Macrocell Apps loaded
>
> Note: You won't have a VBC Telemetry then (Ports
> and Interface used for Spektrum) - but can be
> enablel later by resetting the 3rd party
> protocol.


Neo already update to Pro + Resque.
Hmm, does it mean (if i understand video) if we are doing reset a protocol in the Macrocells, then we are got telemetry? But when it's will be binded to Spektrum once again it's will restore connection protocol?



2 mal bearbeitet. Zuletzt am 26.10.2021 06:12 von Jock_rst.
RV 26 October 2021 09:3926.10.2021 09:39
Quote:Hmm, does it mean (if i understand video) if we are doing reset a protocol in the Macrocells, then we are got telemetry? But when it's will be binded to Spektrum once again it's will restore connection protocol?

Youi have to select for what the ports are used. Either "default" (telemetry) OR Spektrum. Binding the Sats is a process between Sats and Radio and not the NEO itself - we just trigger this when Spektrum is selected.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 26.10.2021 09:39 von RV.
VStabi VStabi Pioneer of Flybarless