← VBar NEO for external transmitters

Vbar Neo Nitro Governor translated

VBar › VBar NEO for external transmitters · Started by johnpssa on 18 November 2021 13:1518.11.2021 13:15
johnpssa 18 November 2021 13:1518.11.2021 13:15
Hi, Vbar Neo upgraded to Pro and nitro governor activated.
Magnet sensor indicator is always green.
(In main screen and Gov.II with or without sensor connected.


Regards
John
RV 18 November 2021 13:3018.11.2021 13:30
It must change once when the magnet passes SLLLOOOOWLLLLLYYYYYY, probably for a brief moment only. The colour doesn't care - the change is the thing we trigger.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
johnpssa 18 November 2021 14:1918.11.2021 14:19
Thanks Rainer,
I did try and would say nothing happened but may be i way not slow enough.
Will check and report back.

John
johnpssa 18 November 2021 19:1318.11.2021 19:13
Hi Rainer,
You were correct, thanks for the advice.
(Should have turned the magnet over)

Regards
John
VStabi VStabi Pioneer of Flybarless