← VBar NEO for external transmitters

Vbar Neo Gov of logo 8000 xxtreme(yge 160hv) translated

VBar › VBar NEO for external transmitters · Started by zcnpol on 26 December 2021 11:0026.12.2021 11:00
zcnpol 26 December 2021 11:0026.12.2021 11:00
I have a logo 800 xx theme.
I changed from full Vbar to Vbar Neo.
But Vbar Gorernor is not working after changed it.
[RPM is not change]
I want to know how to connect cable of Vbar neo Gorernor. Also I want to know to set up Governor of vbar.
[Specifications:vbor touch,YGE 160HV,vbar neo express)
RV 26 December 2021 18:4126.12.2021 18:41
Okay - so you have the master cable into ESC at the NEO.

Then you have the Slave. Use the adapter cable you have (0:40 at this video) and just connect it to RPM (brown to gnd, single yellow is signal)

The VGov Setup is simple - just click on VGov in the Model settings, adjust your RPM's and Gear Ratio.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless