← VBar NEO for external transmitters

Neo NON Vlink to VLink convert translated

VBar › VBar NEO for external transmitters · Started by JDHDienstverlening on 28 April 2022 11:2628.04.2022 11:26
JDHDienstverlening 28 April 2022 11:2628.04.2022 11:26
Hi,

I have a Neo No-Vlink (20014878) and would like to convert to Vlink.
I would like to install the electronic print in a Alu case, do i need only order the 2 antenna wires and a crossover update?or do u must order the conversion kit 5062 with case i dont use and the alu case 5125

Best regard
RV 28 April 2022 18:3828.04.2022 18:38
The conversion kit w/o case is enough. The Antenna outlets are still the same on both ones ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
JDHDienstverlening 28 April 2022 22:4428.04.2022 22:44
Thanks RV.

I will order 2 antenna 180 and a Alu case and will do the crossover
VStabi VStabi Pioneer of Flybarless