Hello,
I have a V-Bar Neo non-vlink using 2 Spectrum DSMX satellites powered by the BEC of a Talon 90. On startup I am getting a Flashing Red indicator on the Neo with the cyclic and tail servos pumping up and down for about 20 times.
The log indicates an Error 85: IMU does not deliver any data anymore
I've had this Neo for years, and it just started happening last season. Sometimes it does not do this, and flies fine when it doesn't but now it does it just about every start up. Maybe 1 out of 15 times it starts normally.
Even when it does flash red and the servos stop pumping, the Neo appears to function properly (though I have not flown it in this condition), but all the compensation movements are correct.
Attached is the Log.
Any suggestions is appreciated. Thank you. Dateianhänge:
öffnen | Download - V-Bar_NEO_log-20000452-Jun-5--2022-4-58-49-PM.pdf (60.8 KB)
I have a V-Bar Neo non-vlink using 2 Spectrum DSMX satellites powered by the BEC of a Talon 90. On startup I am getting a Flashing Red indicator on the Neo with the cyclic and tail servos pumping up and down for about 20 times.
The log indicates an Error 85: IMU does not deliver any data anymore
I've had this Neo for years, and it just started happening last season. Sometimes it does not do this, and flies fine when it doesn't but now it does it just about every start up. Maybe 1 out of 15 times it starts normally.
Even when it does flash red and the servos stop pumping, the Neo appears to function properly (though I have not flown it in this condition), but all the compensation movements are correct.
Attached is the Log.
Any suggestions is appreciated. Thank you. Dateianhänge:
öffnen | Download - V-Bar_NEO_log-20000452-Jun-5--2022-4-58-49-PM.pdf (60.8 KB)