Hi
I have a Gasser heli 30cc with Vbar touch,Vbar Neo Non link with Vsat and a separate Silverline sensor mountend
Because its a gasser with High level Vibrations i putt a Mikado external Silverline sensor in it and mounted on a vibration less plate on the tail (Vbar Neo is in the front above the engine) tail servo Outrage Torq BL 9188
The problem:
Can the Silverline sensor be calibrated or test for good working??
Why?
When i power on the electrics the tail slide very slow from left to right without any inputs..(engine is not running)
I thought it was the servo,so i replace it with a new one,butt still the same problem,the tail slider go slow without inputs from left to right without a running motor.
This issue i have also with running motor and even in hoover flight,i trim serveral time more and more without it getting better and stays still..
So today i did a flight without the external sensor activated in the setup menu.(just the Neo)
Fired up the electronics (motor not running) and stay exact in the middle without moving from left to right, so i was thinking the Silverline has to be calibrated or something.
So i did fly today without a Silverline sensor,and use only the Neo and works great even with high vibrations level.
What can i do?? with the Silverline sensor to check this as it be ok and not broken or something, can this calibrated/test it??
Silverline sensor is 1410033075 ( i know its old butt very less used,was from my Nitro heli)
Neo is 20014878
Vbar control 11002803
Best regards
Jeroen
PS. for now i fly with only the Neo (external silverline sensor is de-activated) without any (vibrations) issue
VBar Control Touch/Vbar Evo/OptiPower/OptiFuel/Maniax/Scorpion Powersystems/HW powersystems/Tron Dnamic/SAB Kraken
1 mal bearbeitet. Zuletzt am 31.10.2022 19:00 von JDHDienstverlening.
I have a Gasser heli 30cc with Vbar touch,Vbar Neo Non link with Vsat and a separate Silverline sensor mountend
Because its a gasser with High level Vibrations i putt a Mikado external Silverline sensor in it and mounted on a vibration less plate on the tail (Vbar Neo is in the front above the engine) tail servo Outrage Torq BL 9188
The problem:
Can the Silverline sensor be calibrated or test for good working??
Why?
When i power on the electrics the tail slide very slow from left to right without any inputs..(engine is not running)
I thought it was the servo,so i replace it with a new one,butt still the same problem,the tail slider go slow without inputs from left to right without a running motor.
This issue i have also with running motor and even in hoover flight,i trim serveral time more and more without it getting better and stays still..
So today i did a flight without the external sensor activated in the setup menu.(just the Neo)
Fired up the electronics (motor not running) and stay exact in the middle without moving from left to right, so i was thinking the Silverline has to be calibrated or something.
So i did fly today without a Silverline sensor,and use only the Neo and works great even with high vibrations level.
What can i do?? with the Silverline sensor to check this as it be ok and not broken or something, can this calibrated/test it??
Silverline sensor is 1410033075 ( i know its old butt very less used,was from my Nitro heli)
Neo is 20014878
Vbar control 11002803
Best regards
Jeroen
PS. for now i fly with only the Neo (external silverline sensor is de-activated) without any (vibrations) issue
VBar Control Touch/Vbar Evo/OptiPower/OptiFuel/Maniax/Scorpion Powersystems/HW powersystems/Tron Dnamic/SAB Kraken
1 mal bearbeitet. Zuletzt am 31.10.2022 19:00 von JDHDienstverlening.