← Flight Trainer

Flight trainer and VBar EVO translated

Mikado Model Helicopters › Flight Trainer · Started by HeiSchu1709 on 10 December 2023 19:4510.12.2023 19:45
HeiSchu1709 10 December 2023 19:4510.12.2023 19:45
Good evening everyone,
After the last update, the EVO no longer queries the battery.
No battery consumption data is displayed after the flight.
Battery usage is no longer tracked in the cloud, and the data is no longer stored there.
Flights are no longer displayed. Is this now the default? Are flights without...
Battery sensor, nothing works anymore???
Furthermore, I noticed that the helicopter in guided mode after the update
has become even tamer... is that intentional or was it caused by the update?
I've changed settings that I can easily revert myself. So, from the settings...
Nothing discernible.
Regards, Heiko
machine-translated from German · Show original
RV 10 December 2023 21:1910.12.2023 21:19
Heiko,

der Flight Trainer hat ja den UI Sensor. Also sollte das gehen. Bei mir tuts ja auch. Akku ID am Logo 200 wäre auch etwas übertrieben ;-)

Aber - was sein könnte - bitte prüfe mal mit der VBCt im Shop ob die UI Sensor App auch da ist.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
HeiSchu1709 11 December 2023 10:4311.12.2023 10:43
Hello Rainer,
many thanks for the quick response.
The UI Sensor App is installed correctly.
Unfortunately, I've now discovered that the grey cable on the UI sensor is broken.
is separated from the circuit board. This is where the loose connection is, which of course occurs when...
Moving the cable sometimes makes the sensor appear and then it disappears again.
It was surely a coincidence that it happened to coincide with the update.
Is something like this still covered under warranty?
Thank you in advance for your efforts.
Regards, Heiko
machine-translated from German · Show original
HeiSchu1709 11 December 2023 10:4511.12.2023 10:45
Attached is a picture of the solder joint....
Regards, Heiko

machine-translated from German · Show original
Eddi E. aus G. 11 December 2023 11:1011.12.2023 11:10
Moin Heiko,

im Zweifel schick den Sensor her und wir löten das Kabel neu an.
Oder Du machst selbst, wenn Du entsprechend ausgerüstet bist und Dich ran traust ... alle drei ablöten, Lötpads reinigen, Kabel minimal kürzen und abisolieren, verzinnen, wieder dran, gut :-)

Dann ... ich meine, der geführte Modus wurde tatsächlich noch etwas entschärft: es gab Berichte, wo Kunden in ungünstigen Fällen den Flight-Trainer aus dem Konzept gebracht haben, und wo der Heli dann einfach runter gefallen ist.

Situation: 'ohne Sinn und Verstand' einfach Pirouetten drehen bei voll negativ Pitch immer am unteren äußeren Rand des Konus der Flugzone ...

Grüßle

Eddi

Born to fly ...
forced to work.
HeiSchu1709 11 December 2023 13:0011.12.2023 13:00
Hi Eddi,
Yes, the cable has been resoldered and the sensor is working as it should again.... ;-)

Thanks and regards
Heiko
machine-translated from German · Show original
Eddi E. aus G. 12 December 2023 09:3612.12.2023 09:36
Hey Heiko,

super! Ist tatsächlich glaube ich auch das erste Mal, dass ich bei so einem Stromsensor auf einem 200-er ein abvibriertes Kabel sehe ... gibt wohl nix was es nicht gibt ...

Weiter viel Spaß!

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless