stephan.ernst@gmx.de
12 November 2023 11:3212.11.2023 11:32
Hello everyone,
First off: I know that I can use the Flight Trainer Logo in free flight mode (trainer off). But in that mode, I'm essentially always flying on bank 1 at 3,800 rpm.
If I bind the Flight Trainer Logo to a separate VBar Control Touch/Evo, will I have the same functionality as with a regular Logo? Specifically, will I have the same three flight modes on the banks? As far as I understand, the hardware is identical, except for the speakers and the driver board.
Or does it also require different Neo Mini software? Express 6.4?
Best regards
Stephan
Hallo zusammen,
vorab: dass ich den Flight Trainer Logo im freien Flugmodus (Trainer aus) nutzen kann, ist bekannt. Aber dabei fliege ich ja quasi immer auf Bank 1 mit 3.800 rpm.
Wenn ich den Flight Trainer Logo mit einer separaten VBar Control Touch/Evo binde, habe ich in der Kombi dann die identische Funktionalität wie bei einem normalen Logo? Sprich mit den 3 verschiedenen Flugmodi auf den Bänken? Die Hardware ist ja, bis auf die Lautsprecher und das Treiberboard, nach meinem Verständnis identisch.
Oder braucht es dazu auch eine andere Neo Mini Software? Die Express 6.4?
Viele Grüße
Stephan
RV
12 November 2023 18:1212.11.2023 18:12
Du hast dann die normale Funktion, kein Problem. Mache ich auch so.
Wenn Du eine VBC t/e für Trainer dann auch noch nutzen möchtest - auch das kann Dir Eddi im Service freischalten (App auf VBC t/e dazu).
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
stephan.ernst@gmx.de
13 November 2023 07:4813.11.2023 07:48
Hello Rainer,
Thanks for your feedback. Do I understand correctly – I just need to bind the FT Logo, as it comes out of the box, to the Touch or EVO, and then I'll have a "fully functional" Logo 200 with all three of your pre-configured flight modes?
Doesn't the appropriate software – Express 6.4 or FT Software – need to be installed on the Neo Mini every time?
If not, then I could switch between trainer mode and normal Logo 200 operation on the Touch/EVO while I'm in the field. That would be fantastic.
Sorry for my newbie questions, 10-year break and no experience with VBar.
Best regards
Stephan
PS: Will the Basic Plus version also include access to all 3 banks/flight modes?
Hallo Rainer,
danke für deine Rückmeldung. Verstehe ich das richtig - ich muss nur den FT Logo, so wie er out-of-box kommt, mit der Touch oder EVO binden, und dann habe ich einen "vollwertigen" Logo 200 mit allen 3 von Euch vorkonfigurierten Flugmodi?
Muss auf der Neo Mini dabei nicht jedes Mal die passende Software installiert werden - Express 6.4 bzw. FT Software?
Falls nein, dann könnte ich ja an der Touch / EVO auf dem Feld zwischen Trainermodus und normalen Logo 200 Betrieb umstellen. Das wäre genial.
Sorry für meine Newbie Fragen, 10 Jahre Pause und keine Erfahrung mit VBar.
Viele Grüße
Stephan
P.S.: wird mit der Basic Plus auch der Zugriff auf alle 3 Bänke/Flugmodi kommen?
Eddi E. aus G.
13 November 2023 08:5213.11.2023 08:52
Moin,
genau, nur binden. Die Flight-Trainer-Firmware ist eine Pro+Rescue, da muss man nix weiter tun, bis auf eine Vorflugkontrolle natürlich.
Bitte nur beachten, dass Du individuelle Änderungen am Setup _nur_ in Bank 2 und 3 vornimmst.
Bank 1 _muss_ unverändert bleiben, für den Flight-Trainer.
Ja, Basic Plus macht aus der VBar Control Basic eine (fast) vollwertige VBar Control, ähnlich wie die VBar Control Classic, mit kleinerem Display.
Was sie allerdings nicht kann, ist erweiterte Telemetrie (über Drehzahl, Strom/Spannungs-Sensor, RC-Spannung) hinaus, und sie loggt nicht.
Grüßle
Eddi
Born to fly ...
forced to work.
Teci
4 July 2024 13:2504.07.2024 13:25
Good morning
I'll just jump in on this topic here,
My problem is that I also want to use the Logo200 trainer with the Evo.
I also watched Rainer's video (great!) and tried it exactly the same way, but unfortunately the installation prompt for the navigation (Flight Trainer) app doesn't appear during binding.
The logo is bound, the initial installation runs in the background, then nothing else happens.
I updated the hardware beforehand, meaning I installed all updates.
Do you have any idea what might be going wrong?
Regards, Horst
Moin
ich hänge mich mal hier an das Thema an,
Mein Problem ist das ich den Logo200 Trainer auch mit der Evo nutzen möchte
habe auch schön das Video von Rainer angeschaut ( Top ) und es genau so versucht, leider kommt beim Binden nicht die Installationsaluforderung zur Navigation (Flight Trainer) APP
Der Logo wird gebunden die erste Installation läuft auch im Hintergrund durch dann passiert nichts mehr.
Die Hardware habe ich vorher auf aktuellen Stand gebracht, sprich alle Updates gemacht.
Hab ihr mir einen Tipp was da schief laufen könnte.
Gruß, Horst
Eddi E. aus G.
4 July 2024 13:3504.07.2024 13:35
Hallo Horst,
die Apps sind auch nicht öffentlich, gibt's erst nach Vergatterung (Einweisung).
Das Haupt'problem' mit dem Fliegen mit Classic/Touch/EVO ist, man kann alle Parameter in allen Bänken einstellen. Verstellen. Mit Betonung auf VER.
Das bedeutet, man kann den Heli so verbiegen, dass er nachher mit dem Trainer nicht mehr richtig funktioniert, oder man kann auch in Bank 2, Bank 3 Trainer fliegen, wofür (Drehzahl, Wendigkeit etc.) der Flight-Trainer nicht abgestimmt ist, wo der Heli dann auch abhauen könnte.
Für-wen-wer sich jetzt auf dem Schlips getreten fühlt ;-) gern geschehen ... wir haben leider zu viel erlebt, zu oft vermeidbare Reklamationen bekommen.
Selbst oder insbesondere von 'Experten', 'Profis', ... ;-)
Heißt aber nicht, dass es nicht geht. Schick mir eine Mail an service (at) mikado-heli (punkt) de und wir machen von da aus weiter.
Fliegen kann man den 200-er Flight-Trainer natürlich mit jedem Sender, nur sollte man auch da tunlichst davon absehen, die Parameter von Bank 1 auch nur schief anzuschauen ;-) Bank 2, 3, kann man machen was man will.
Grüßle
Eddi
Born to fly ...
forced to work.
Teci
4 July 2024 13:5104.07.2024 13:51
Hello Eddie
Thanks for the quick reply
I have read the instructions regarding flying and not changing Bank 1.
I'll send the email and refer to your suggestion.
Thanks Horst
Hallo Eddi
Danke für die schnelle Antwort
die Hinweise zum Fliegen und nicht verändern der Bank 1 habe ich gelesen.
Ich bringe die Mail auf den weg und beziehe mich auf deinen Hinweis.
Danke Horst
Panzerwalze
13 February 2025 06:2813.02.2025 06:28
Hi, I also have a question.
I have the Flight Trainer (Vbar Basic with the 6 toggle switches). Is it possible for me to fly the Logo 200 freely (without a platform) using the Vbar Basic in beginner mode? Or would it make more sense to get, for example, a used Vbar Classic for that purpose? Would the Neo Mini then need to be upgraded to Pro & Rescue? It shows the upgrade as available under Apps for my Logo from the trainer bundle, even though I assumed that the Logo (or rather the Neo Mini) from the bundle already included Pro & Rescue. So many questions! :-)
Best regards
Mirco
Moin ich habe auch eine Frage.
Ich habe den Flight Trainer bei mir liegen (Vbar Basic schon mit den 6 Kippschaltern). Ist es mir möglich den Logo 200 frei (ohne Plattform) mit der Vbar Basic im Anfänger Modus zu fliegen? Oder macht es mehr Sinn sich z.B. eine gebrauchte Vbar classic für den Fall zu holen? Muss das Neo mini dann geupgraded werden auf Pro & Rescue? Zeigt er bei meinem Logo aus dem Trainer Bundel unter Apps als Upgrade an, obwohl ich angenommen hatte, das der Logo (bzw. das Neo mini) aus dem Bundel das Pro & Rescue schon beinhaltet? Fragen über Fragen :-)
Viele Grüße
Mirco
Eddi E. aus G.
13 February 2025 09:1013.02.2025 09:10
Hi Mirco,
To tell you more precisely what your problem is, I would need a serial number. You can also send it by email to service (at) mikado-heli (dot) de.
Of course you can fly it freely. The trainer firmware _is_ a Pro+Rescue version; the flight trainer is essentially based on the beginner mode and the rescue system.
The coaching position would then be for beginners.
Grüßle
Eddi
Born to fly ...
forced to work.
Moin Mirco,
um genauer sagen zu können was Du hast müsste ich eine Seriennummer wissen. Gern auch per Mail an service (at) mikado-heli (punkt) de.
Klar kann man ihn frei fliegen. Die Trainer-Firmware _ist_ eine Pro+Rettung, der Flight-Trainer basiert ja quasi auf dem Anfängermodus und der Rettung.
Die Trainer-Stellung wäre dann Anfänger.
Grüßle
Eddi
Born to fly ...
forced to work.
Panzerwalze
13 February 2025 10:2613.02.2025 10:26
Hi Eddi,
So that means I can fly the Logo in beginner mode with rescue mode via a switch without binding the platform – that would be great! @Eddi I'll send the serial numbers right away :-)
Greetings
Mirco
Hallo Eddi,
das heißt also, ich kann den Logo dann im Anfängermodus mit Rettung über einen Schalter fliegen ohne die Plattform zu binden, das wäre klasse! @Eddi ich schicke gleich mal die Seriennummern :-)
Grüße
Mirco
Eddi E. aus G.
13 February 2025 13:5313.02.2025 13:53
Hi Mirco,
Try this: if (without a platform) the trainer switch is pulled to the trainer-off position, does the recovery maneuver trigger (the swashplate twitches slightly upwards)? With the trainer switch in the center position, the full pitch swing should be visible. With the trainer switch on, it should be less negative.
For anything further, you would need the Basic Plus update, which isn't officially available for purchase yet. But it could be done.
Disadvantage: you give up simplicity, have to change and adjust the switch assignment, be careful with the bank switch (trainer only on bank 1) and a few other minor things.
Grüßle
Eddi
Born to fly ...
forced to work.
Hi Mirco,
probiere mal: wenn (ohne Plattform) der Trainerschalter in die Trainer-Aus-Position gezogen wird, wird dann Rettung ausgelöst (Taumelscheibe zuckt leicht nach oben)? Wenn der Trainerschalter in der Mittelstellung steht, müsste der volle Pitch-Hub zu sehen sein. Wenn in Trainer-An, weniger negativ.
Für weiteres bräuchtest Du das Basic-Plus-Update, das es im Moment noch nicht offiziell zu kaufen gibt. Könnte man aber machen.
Nachteil: man gibt Einfachheit auf, muss die Schalter-Zuordnung umstellen, anpassen, mit dem Bank-Schalter dann aufpassen (Trainer nur Bank 1) und noch ein paar Kleinigkeiten.
Grüßle
Eddi
Born to fly ...
forced to work.
Panzerwalze
13 February 2025 16:3413.02.2025 16:34
Hi Eddy,
Thanks for the quick reply, so it probably makes more sense to buy, for example, a used Vbar Classic, use it for "normal" Logo200 operation and continue using the Basic for the trainer?
Best regards
Mirco
Hi Eddy,
danke für die rasche Antwort, also macht es doch wahrscheinlich eher Sinn, sich eine bspw. gebrauchte Vbar classic zu kaufen, diese dann für den "normalen" Logo200 Betrieb zu nutzen und die Basic weiter für den Trainer einzusetzen?
Viele Grüße
Mirco
Eddi E. aus G.
14 February 2025 09:0214.02.2025 09:02
Hi Mirco,
Basically, yes. Or better yet, a Touch or EVO, thinking ahead. The new version 8 for VBar EVO will still work with the Classic, for example, but you won't be able to adjust the settings.
Otherwise, if you stick with it, you might soon end up buying a third channel ;-)
—Eddi
Born to fly ...
forced to work.
Hi Mirco,
grundsätzlich ja. Oder gleich eine Touch oder EVO, in die Zukunft gedacht. Die neue Version 8 für VStabi EVO wird sich mit der Classic bspw. noch fliegen, aber nicht mehr einstellen lassen.
Sonst kaufst Du Dir, wenn Du dran bleibst, womöglich in Kürze noch einen 3. Sender ;-)
—Eddi
Born to fly ...
forced to work.