Good day dear Mikado team,
I am planning a special control project and would like to know if there is a technical solution for this using your VBar system.
My existing equipment:
* VBar Control Touch PRO
* VBar NEO VBasic
* Align T-Rex 700
* PUMA Pro Flight Trainer (helicopter simulator control for Airbus H125)
My plan:
I want to use the PUMA Pro Flight Trainer as a physical control unit to control my real T-Rex 700.
The desired signal path would be:
PUMA Pro Flight Trainer (US 8-) ? VBar Control Touch PRO? Radio transmission? VBar NEO? T Rex 700.
All control functions of the PUMA should be used:
* Roll
* Nick
* Tail control
* Collective Pitch
* Additional functions, such as engine shutdown and flight phases
The VBar Control Touch PRO will continue to serve as the actual RC transmitter and for radio transmission to the NEO.
My questions:
1. Is there a way to feed external USB control data into the VBar Control Touch?
2. Does the VBar Control Touch support an external joystick or USB HID controller as an input?
3. Is there an alternative interface or module that would allow this project to be realized?
4. Would a corresponding solution be possible using the teacher-student function?
5. Is there a technical way to transfer the PUMA's control axes to the VBar channels without bypassing the original VBar radio link?
It is important to me that the solution works reliably and that all safety functions, especially engine shutdown and failsafe, are retained.
I would greatly appreciate a technical assessment and, if possible, a suggested solution.
Thank you in advance for your support.
Kind regards
I am planning a special control project and would like to know if there is a technical solution for this using your VBar system.
My existing equipment:
* VBar Control Touch PRO
* VBar NEO VBasic
* Align T-Rex 700
* PUMA Pro Flight Trainer (helicopter simulator control for Airbus H125)
My plan:
I want to use the PUMA Pro Flight Trainer as a physical control unit to control my real T-Rex 700.
The desired signal path would be:
PUMA Pro Flight Trainer (US 8-) ? VBar Control Touch PRO? Radio transmission? VBar NEO? T Rex 700.
All control functions of the PUMA should be used:
* Roll
* Nick
* Tail control
* Collective Pitch
* Additional functions, such as engine shutdown and flight phases
The VBar Control Touch PRO will continue to serve as the actual RC transmitter and for radio transmission to the NEO.
My questions:
1. Is there a way to feed external USB control data into the VBar Control Touch?
2. Does the VBar Control Touch support an external joystick or USB HID controller as an input?
3. Is there an alternative interface or module that would allow this project to be realized?
4. Would a corresponding solution be possible using the teacher-student function?
5. Is there a technical way to transfer the PUMA's control axes to the VBar channels without bypassing the original VBar radio link?
It is important to me that the solution works reliably and that all safety functions, especially engine shutdown and failsafe, are retained.
I would greatly appreciate a technical assessment and, if possible, a suggested solution.
Thank you in advance for your support.
Kind regards
Guten Tag liebes Mikado-Team,
ich plane ein besonderes Steuerungsprojekt und möchte gerne wissen, ob es hierfür eine technische Lösung mit Ihrem VBar-System gibt.
Meine vorhandene Ausrüstung:
* VBar Control Touch PRO
* VBar NEO VBasic
* Align T-Rex 700
* PUMA Pro Flight Trainer (Helikopter-Simulatorsteuerung für Airbus H125)
Mein Vorhaben:
Ich möchte den PUMA Pro Flight Trainer als physisches Steuergerät verwenden, um meinen echten T-Rex 700 zu steuern.
Der gewünschte Signalweg wäre:
PUMA Pro Flight Trainer (US 8-) ? VBar Control Touch PRO ? Funkübertragung ? VBar NEO ? T-Rex 700.
Dabei sollen sämtliche Steuerfunktionen des PUMA verwendet werden:
* Roll
* Nick
* Hecksteuerung
* Collective Pitch
* Weitere Zusatzfunktionen, beispielsweise Motor-Aus und Flugphasen
Die VBar Control Touch PRO soll weiterhin als eigentlicher RC-Sender und für die Funkübertragung zur NEO dienen.
Meine Fragen:
1. Gibt es eine Möglichkeit, externe USB-Steuerdaten in die VBar Control Touch einzuspeisen?
2. Unterstützt die VBar Control Touch einen externen Joystick oder eine USB-HID-Steuerung als Eingang?
3. Gibt es eine alternative Schnittstelle oder ein Modul, mit dem sich dieses Vorhaben realisieren lässt?
4. Wäre eine entsprechende Lösung über die Lehrer-Schüler-Funktion möglich?
5. Gibt es eine technische Möglichkeit, die Steuerachsen des PUMA auf die VBar-Kanäle zu übertragen, ohne die originale Funkstrecke der VBar zu umgehen?
Mir ist wichtig, dass die Lösung zuverlässig funktioniert und alle Sicherheitsfunktionen, insbesondere Motor-Aus und Failsafe, erhalten bleiben.
Ich würde mich sehr über eine technische Einschätzung und gegebenenfalls einen Lösungsvorschlag freuen.
Vielen Dank im Voraus für Ihre Unterstützung.
Freundliche Grüße
ich plane ein besonderes Steuerungsprojekt und möchte gerne wissen, ob es hierfür eine technische Lösung mit Ihrem VBar-System gibt.
Meine vorhandene Ausrüstung:
* VBar Control Touch PRO
* VBar NEO VBasic
* Align T-Rex 700
* PUMA Pro Flight Trainer (Helikopter-Simulatorsteuerung für Airbus H125)
Mein Vorhaben:
Ich möchte den PUMA Pro Flight Trainer als physisches Steuergerät verwenden, um meinen echten T-Rex 700 zu steuern.
Der gewünschte Signalweg wäre:
PUMA Pro Flight Trainer (US 8-) ? VBar Control Touch PRO ? Funkübertragung ? VBar NEO ? T-Rex 700.
Dabei sollen sämtliche Steuerfunktionen des PUMA verwendet werden:
* Roll
* Nick
* Hecksteuerung
* Collective Pitch
* Weitere Zusatzfunktionen, beispielsweise Motor-Aus und Flugphasen
Die VBar Control Touch PRO soll weiterhin als eigentlicher RC-Sender und für die Funkübertragung zur NEO dienen.
Meine Fragen:
1. Gibt es eine Möglichkeit, externe USB-Steuerdaten in die VBar Control Touch einzuspeisen?
2. Unterstützt die VBar Control Touch einen externen Joystick oder eine USB-HID-Steuerung als Eingang?
3. Gibt es eine alternative Schnittstelle oder ein Modul, mit dem sich dieses Vorhaben realisieren lässt?
4. Wäre eine entsprechende Lösung über die Lehrer-Schüler-Funktion möglich?
5. Gibt es eine technische Möglichkeit, die Steuerachsen des PUMA auf die VBar-Kanäle zu übertragen, ohne die originale Funkstrecke der VBar zu umgehen?
Mir ist wichtig, dass die Lösung zuverlässig funktioniert und alle Sicherheitsfunktionen, insbesondere Motor-Aus und Failsafe, erhalten bleiben.
Ich würde mich sehr über eine technische Einschätzung und gegebenenfalls einen Lösungsvorschlag freuen.
Vielen Dank im Voraus für Ihre Unterstützung.
Freundliche Grüße
machine-translated from German · Show original