← Logo 700 and 800

5300g/11.86 lbs

Mikado Model Helicopters › Logo 700 and 800 · Started by cudaboy_71 on 17 September 2016 03:3617.09.2016 03:36
cudaboy_71 17 September 2016 03:3617.09.2016 03:36
on the home page it says with off the shelf components and 5000mah packs you can get 5300g/11.86lb

http://shop.mikado-heli.de/LOGO-Helicopters/LOGO-700.htm?shop=k_mikado_e&SessionId=&a=catalog&t=7567&c=8147&p=8147

Obviously, there are a lot of different components people are commonly using. Is there a list of components someone used to come up with that value?

Servos: ?
FBL: Neo I hope...vlink or non w/ antenna?
Motor: ?
ESC: ? heatsink?
BEC: ?
Pack: ?
Blades: VTX 697 I assume to achieve light weight. how much heavier are 717 v 697?

I'm just curious what was used so I can compare it to the components I'm planning.
galensk 18 September 2016 22:1418.09.2016 22:14
Mine weights 5500 gr with

Kosmik 160+kontronik cooler fan
JR8925 servos
Scorpion standard motor
Optipower ultraguard
SLS5000/30C x2
Kontronik TELME module
VTX717 blades

Flies awesome !!!

cudaboy_71 18 September 2016 22:2518.09.2016 22:25
That's not bad. I am doing the 717s as well. I was hoping the 5300-5500g weight was not prohibitive with the longer blades.

Do you have a scale you can put those packs on? I'm curious how those compare with the 45C Gens Ace 6s 5000s; I'm also considering the 55C Thunderpower 5000s.

Aside from that I have sitting on the workbench:

YGE 160/heatsink
Scorpion 4525-520
Scorpion BUG
WR Hercules SuperBEC
BLS255/256HV
NEO+sat
UIsensor

I'm hoping to come in under 5600g
galensk 18 September 2016 22:4618.09.2016 22:46
Here you go sir !! Good luck...

cudaboy_71 18 September 2016 23:3618.09.2016 23:36
Thanks for pulling one off the tray. I know that's a PITA.
Eddi E. aus G. 19 September 2016 09:2319.09.2016 09:23
Hi,

the weight of the mechanics only (with battery plate and canopy) is 2,212 g / 4.876 lbs

This one weighs 4,934 g / 10.877 lbs

12s 4.400 GensAce
Standard-Motor 4525 Ultimate
Savox 1257/1290
Jive Pro 120
NEO VLink
Stromsensor
697 mm VTX/105 RT Blätter

Not necessarily a hardcore 3D setup, but surely also not only a sitting duck ... and maybe it helps with calculating :-)

Kind regards

Eddi

Born to fly ...
forced to work.

cudaboy_71 22 September 2016 06:4722.09.2016 06:47
Thanks, Eddi. Will be building soon, I hope :-D
VStabi VStabi Pioneer of Flybarless