Any ideas what i`m doing wrong or has the lightning striked again on me?
First time had pinion failure at about 10. flight and Mikado kindly replaced pinion, which had broken on welding.
Now it happend again 70 flights after replament of pinion similar way.
Gear mesh was set zero at highest point of maingear and maingear has axial play of 1.5mm approx as required. I just cant think what is wrong with this issue. Never had any problems with my 480Xxtreme hundreds of flights.
Ideas to check before i take heli apart?
Motor is Scorpion 4525-520kv ultimate and Hobbywing 160A ESC
I`m using HW governor and headspeeds 1600-1800-2000
Below is pictures of pinion.
https://1drv.ms/a/s!AiLObKlfkBwUhf1LcqOkLsNstRGPUg
First time had pinion failure at about 10. flight and Mikado kindly replaced pinion, which had broken on welding.
Now it happend again 70 flights after replament of pinion similar way.
Gear mesh was set zero at highest point of maingear and maingear has axial play of 1.5mm approx as required. I just cant think what is wrong with this issue. Never had any problems with my 480Xxtreme hundreds of flights.
Ideas to check before i take heli apart?
Motor is Scorpion 4525-520kv ultimate and Hobbywing 160A ESC
I`m using HW governor and headspeeds 1600-1800-2000
Below is pictures of pinion.
https://1drv.ms/a/s!AiLObKlfkBwUhf1LcqOkLsNstRGPUg