Marianovbar
19 December 2019 22:3219.12.2019 22:32
Hi, i have a VBC-touch and on my 700 logo when I move the aileron to both sides it gets a little bit of elevator mixed and when I move the elevator to both sides it gets a little of aileron. Is something mechanic on the rotor or some parameter on the VBC?
Regards!
Eddi E. aus G.
20 December 2019 08:5320.12.2019 08:53
Hi,
please test in setup mode, where the swash plate servos are moving. There, the control loop is inactive, so you can see if it's mechanical.
Basicaly, we only have collective -> elevator mixing which is balanced in flight, when the model is moving freely, but which shows and looks a little odd, on the ground.
Kind regards
Eddi
Born to fly ...
forced to work.
Marianovbar
2 January 2020 11:1802.01.2020 11:18
Hi, i tested in setup mode and when i move slowly the aileron, elevator moves just a little bit and the same when i move elevator some movement on the aileron. I can't think of what to touch electronic and mechanically, the only thing i upgraded on the main rotor are shims behind the mixing arms.
Regards