← Logo 700 and 800

Servo Arms

Mikado Model Helicopters › Logo 700 and 800 · Started by ian Spencer on 29 April 2026 16:5229.04.2026 16:52
ian Spencer 29 April 2026 16:5229.04.2026 16:52
Hi,

The Logo 700 manual suggests that the servo arms should be 17mm to the ball.
How critical is this? I have Mikado Carbon arms on my 600SE but my 12V KST servos (bought for the new Logo 700) come with aluminium arm with the shortest hole at 18.5mm
I don't mind buying some Mikado arms but I guess with 12v servos the Alloy ones would be better?

Kind regards,
Ian
RV 29 April 2026 17:2629.04.2026 17:26
I would use them with 18.5 mm - there should be no big difference, especially with the powerful KST 12 Types ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless