Good evening everyone.
Following the xxtreme, the new 700 has now also decided to break apart.
I'm afraid I'm quite at a loss and am looking for your help.
Initial situation:
Backwards away from me, the helicopter began a loop in my direction. When it returned to normal flight attitude with its tail pointing towards me, the rotor speed dropped and the helicopter crashed.
This morning I changed the timing from autotiming to 15 degrees fixed timing.
I can't say for sure whether he was still responding to input; it all happened very quickly.
A few things in the logs are making me suspicious.
I don't want to comment further in order to avoid making suggestions.
Logo 700
Vstabi Neo
Vbar control
UI Sensor
1x 25F buffer with R-board
Kosmik 200 HV
Scorpion HK4525-520 ultimate
3x Hitec 8360 TH
1x BLS 276 SV
I hope all relevant data has been mentioned.
Thank you in advance,
Felix
I would like to attach the original logs, but I'm not allowed to (file type) or I don't know how else to do it.
Edited once. Last edited on 10/09/2016 at 22:04 by Corsair.
Following the xxtreme, the new 700 has now also decided to break apart.
I'm afraid I'm quite at a loss and am looking for your help.
Initial situation:
Backwards away from me, the helicopter began a loop in my direction. When it returned to normal flight attitude with its tail pointing towards me, the rotor speed dropped and the helicopter crashed.
This morning I changed the timing from autotiming to 15 degrees fixed timing.
I can't say for sure whether he was still responding to input; it all happened very quickly.
A few things in the logs are making me suspicious.
I don't want to comment further in order to avoid making suggestions.
Logo 700
Vstabi Neo
Vbar control
UI Sensor
1x 25F buffer with R-board
Kosmik 200 HV
Scorpion HK4525-520 ultimate
3x Hitec 8360 TH
1x BLS 276 SV
I hope all relevant data has been mentioned.
Thank you in advance,
Felix
I would like to attach the original logs, but I'm not allowed to (file type) or I don't know how else to do it.
Edited once. Last edited on 10/09/2016 at 22:04 by Corsair.
Guten Abend zusammen.
Nach dem xxtreme, hat sich nun auch der neue 700 dazu entschieden, sich zu zerlegen.
Ich bin leider ziemlich ratlos und suche Eure Hilfe.
Ausgangslage:
Rücken rückwärts von mir weg zum Loop in meine Richtung. Als der Heli wieder in Normalfluglage mit dem Heck auf mich zeigte verschwand die Drehzahl und der Heli schlug ein.
Ich habe heute Morgen das timing von autotiming auf 15 grad fixed timing umgestellt.
Ob Er noch auf Eingaben reagierte kann ich nicht mehr 100% sagen, es ging sehr schnell..
Ein paar Sachen in den Logs machen mich stutzig.
Ich möchte nicht weiter kommentieren um Suggestionen auszuschliessen.
Logo 700
Vstabi Neo
Vbar control
UI Sensor
1x 25F Puffer mit R-Platine
Kosmik 200 HV
Scorpion HK4525-520 ultimate
3x Hitec 8360 TH
1x BLS 276 SV
Ich hoffe es sind alle relevanten Daten genannt.
Vielen Dank im Voraus,
Felix
Ich würde gerne die original logs anhängen, darf aber nicht (Dateityp) bzw. weiss nicht wie ich das anders lösen könnte.?
1 mal bearbeitet. Zuletzt am 10.09.2016 22:04 von Corsair.
Nach dem xxtreme, hat sich nun auch der neue 700 dazu entschieden, sich zu zerlegen.
Ich bin leider ziemlich ratlos und suche Eure Hilfe.
Ausgangslage:
Rücken rückwärts von mir weg zum Loop in meine Richtung. Als der Heli wieder in Normalfluglage mit dem Heck auf mich zeigte verschwand die Drehzahl und der Heli schlug ein.
Ich habe heute Morgen das timing von autotiming auf 15 grad fixed timing umgestellt.
Ob Er noch auf Eingaben reagierte kann ich nicht mehr 100% sagen, es ging sehr schnell..
Ein paar Sachen in den Logs machen mich stutzig.
Ich möchte nicht weiter kommentieren um Suggestionen auszuschliessen.
Logo 700
Vstabi Neo
Vbar control
UI Sensor
1x 25F Puffer mit R-Platine
Kosmik 200 HV
Scorpion HK4525-520 ultimate
3x Hitec 8360 TH
1x BLS 276 SV
Ich hoffe es sind alle relevanten Daten genannt.
Vielen Dank im Voraus,
Felix
Ich würde gerne die original logs anhängen, darf aber nicht (Dateityp) bzw. weiss nicht wie ich das anders lösen könnte.?
1 mal bearbeitet. Zuletzt am 10.09.2016 22:04 von Corsair.
machine-translated from German · Show original