Today was my first flight with my new Logo 700 vtx and the Tribunus 200A. :-)
The assembly was extremely easy and went very quickly and smoothly. The electronics installation and wiring were also simple.
I've had the Tribunus on my shortlist for quite some time. Firstly, its price, weight, size, and telemetry are very appealing compared to the red ones. With the red ones, you also need a Progunit and a Telme, which incurs additional costs. >:-(
I was more than surprised by how easy it was to program the ESC using Vbar and Neo. Just plug it into the Neo, select the Vbar control, and you're done. Then the maiden flights started today. Six of them, to be precise. :-)
The flights were conducted using various flight styles and different RPMs between 1000 and 2000. Regarding temperature, I can currently confirm that it reaches 38°C at low RPM and 50°C at 3D and 2000 RPM. How the controller will perform at 35°C in summer remains to be seen.
The last flight was a leisurely one at 1000 RPM. Loops, turns, inverted maneuvers, etc... and now for the kicker. 22.5 MINUTES!!!!! Simply awesome :-)
The only changes I made to the basic setup were rotation rate, style, and Stop Gain A on the rear. Everything else remained at its default settings.
I'm looking forward to the next flights with my new logo. I've attached some pictures of the wiring.
Have fun with your logos.
The assembly was extremely easy and went very quickly and smoothly. The electronics installation and wiring were also simple.
I've had the Tribunus on my shortlist for quite some time. Firstly, its price, weight, size, and telemetry are very appealing compared to the red ones. With the red ones, you also need a Progunit and a Telme, which incurs additional costs. >:-(
I was more than surprised by how easy it was to program the ESC using Vbar and Neo. Just plug it into the Neo, select the Vbar control, and you're done. Then the maiden flights started today. Six of them, to be precise. :-)
The flights were conducted using various flight styles and different RPMs between 1000 and 2000. Regarding temperature, I can currently confirm that it reaches 38°C at low RPM and 50°C at 3D and 2000 RPM. How the controller will perform at 35°C in summer remains to be seen.
The last flight was a leisurely one at 1000 RPM. Loops, turns, inverted maneuvers, etc... and now for the kicker. 22.5 MINUTES!!!!! Simply awesome :-)
The only changes I made to the basic setup were rotation rate, style, and Stop Gain A on the rear. Everything else remained at its default settings.
I'm looking forward to the next flights with my new logo. I've attached some pictures of the wiring.
Have fun with your logos.
Heute war mein Erstflug mit meinem neuen Logo 700 vtx mit dem Tribunus 200A. :-)
Der Aufbau war mehr als leicht und ging sehr schnell und unkompliziert von statten. Auch der Elektronikeinbau und Verkabelung war einfach.
Ich habe schon des längeren den Tribunus in der engeren Auswahl gehabt. Zu einem ist der Preis, Gewicht, Größe und Telemetrie sehr verlockend gegenüber den roten. Hier brauchte man noch eine Progunit und ein Telme, was weitere Zusatzkosten verursacht. >:-(
Ich war von der Einfachheit mittels Vbar und Neo den Regler zu programmieren, mehr als überrascht. Am Neo anstecken und Regelung via Vbar auswählen und fertig. Dann ging es auch heute schon los mit den Erstflügen. Genauer gesagt sechs an der Zahl. :-)
Geflogen wurde mit verschiedenen Flugstillen und unterschiedlichen Drehzahlen zwischen 1000 und 2000 RPM. Zur Temperatur kann ich aus heutigen Stand feststellen, das diese bei LOW-RPM 38°C und bei 3D und 2000 RPM bei 50°C liegt. Wie sich der Regler bei 35°C im Sommer bewähren wird, wird sich noch zeigen.
Der letzte Flug war mit einer Drehzahl von 1000 RPM gemütlich geflogen. Looping, Turn, Rücken usw... und jetzt kommt es. 22,5 MINUTEN!!!!! Einfach nur Geil :-)
Was ich am Grundsetup geändert habe war, Drehrate, Style und Stop Gain A am Heck. Der Rest blieb mal auf Standard.
Ich freue mich schon auf die nächsten Flüge mit meinem neuen Logo. Zur Verkabelung habe ich einige Bilder angefügt.
Viel Spaß noch mit euren Logos.
Der Aufbau war mehr als leicht und ging sehr schnell und unkompliziert von statten. Auch der Elektronikeinbau und Verkabelung war einfach.
Ich habe schon des längeren den Tribunus in der engeren Auswahl gehabt. Zu einem ist der Preis, Gewicht, Größe und Telemetrie sehr verlockend gegenüber den roten. Hier brauchte man noch eine Progunit und ein Telme, was weitere Zusatzkosten verursacht. >:-(
Ich war von der Einfachheit mittels Vbar und Neo den Regler zu programmieren, mehr als überrascht. Am Neo anstecken und Regelung via Vbar auswählen und fertig. Dann ging es auch heute schon los mit den Erstflügen. Genauer gesagt sechs an der Zahl. :-)
Geflogen wurde mit verschiedenen Flugstillen und unterschiedlichen Drehzahlen zwischen 1000 und 2000 RPM. Zur Temperatur kann ich aus heutigen Stand feststellen, das diese bei LOW-RPM 38°C und bei 3D und 2000 RPM bei 50°C liegt. Wie sich der Regler bei 35°C im Sommer bewähren wird, wird sich noch zeigen.
Der letzte Flug war mit einer Drehzahl von 1000 RPM gemütlich geflogen. Looping, Turn, Rücken usw... und jetzt kommt es. 22,5 MINUTEN!!!!! Einfach nur Geil :-)
Was ich am Grundsetup geändert habe war, Drehrate, Style und Stop Gain A am Heck. Der Rest blieb mal auf Standard.
Ich freue mich schon auf die nächsten Flüge mit meinem neuen Logo. Zur Verkabelung habe ich einige Bilder angefügt.
Viel Spaß noch mit euren Logos.
machine-translated from German · Show original