← Logo 700 and 800

Rear swing Logo 700, VBar, Tribunus 200 translated

Mikado Model Helicopters › Logo 700 and 800 · Started by Werner on 4 June 2017 14:3604.06.2017 14:36
Werner 4 June 2017 14:3604.06.2017 14:36
Hallo zusammen, bin gerade etwas ratlos mit meiner Combo. Hatte letztes Wochenende Erstflug mit dem Logo 700. Aber das ging voll daneben. Hatte starkes Heckpendel (ca. 10cm nach links und rechts) beim Schweben. War fast unfliegbar. Habe mit der Heckentfindlichkeit rumprobiert wurde aber nicht besser. So ein Heckpendeln hatte ich noch nie bei meinen Helis. Hatte auch einen Logo 700 xxtreme, der hat das gleiche Heck, das war von Anfang an top. Allerdings mit einem Kosmik als Regler. Gibt es für den Tribunus in Verbindung mit dem Neon und nein Scorpion 4530/500 einen Einstellempfehlung? Regelung soll übers Neo und Vbar laufen.
Was ich auch noch suche ist die Timingeinstellung. Hab da nix gefunden. Der Scorpion wird gut warm bei wenig Leistungsabfrage.

Grüße Werner

VBar-Touch, Chronos V2, T-Rex 700 X
RV 4 June 2017 15:2104.06.2017 15:21
Ist der Tribunus up-to-date?
Ist die VBC up-to-date gewesen vor aktivierung des Auto Setups?
Wurde das automatische Setup ausgeführt?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Werner 5 June 2017 10:0605.06.2017 10:06
Hi Rainer,

I currently have the latest update installed on Tribunus, version 49; it was version 47 when I installed it.
The previous update was already installed on the Vbar.
I recently installed the new (current) firmware on the Vbar.
I performed the Tribunus setup on the Vbar.

Greetings Werner

VBar Touch, Chronos V2, T-Rex 700 X
machine-translated from German · Show original
M@rtin 5 June 2017 10:2105.06.2017 10:21
Hello Werner

Could you upload the current Neo file? Something's definitely wrong with the VL and that's causing the tail jibing, but about 10cm is quite a lot... It's known that the Logo has this problem, but not to this extent.
machine-translated from German · Show original
Werner 5 June 2017 10:4805.06.2017 10:48
Hi Martin,

I've saved the setup and attached it.

Greetings Werner

VBar-Touch, Chronos V2, T-Rex 700
Open | Download - LOGO_700_W.vbr (2.3 KB)
machine-translated from German · Show original
M@rtin 5 June 2017 11:1405.06.2017 11:14
OK, I can't find anything in the setup that could highlight such a strong bending motion...

Does the rear linkage move easily and is nothing stuck?
Disconnect the rear linkage and check if the blade grips and the rear window sleeve can be moved easily.

Also, pull on the rear blade holder and move it to see if you feel any rough running from the pressure bearings.
machine-translated from German · Show original
Werner 5 June 2017 13:1605.06.2017 13:16
Heckl works just like mine on the 700 xxtreme. The O-rings make it consistently "easy." Nothing unusual noticed. Mechanically, I'd say everything is normal.

Greetings Werner

VBar Touch, Chronos V2, T-Rex 700 X
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless