← Logo 700 and 800

aileron/elevator mixing

Mikado Model Helicopters › Logo 700 and 800 · Started by Marianovbar on 16 December 2020 03:4616.12.2020 03:46
Marianovbar 16 December 2020 03:4616.12.2020 03:46
Hi, When i flight my logo 700, i move the aileron to both sides it gets a little bit of elevator mixed and when I move the elevator to both sides it gets a little of aileron. Is something mechanic on the rotor or some parameter on the VBC?
i tested in setup mode and when i move slowly the aileron, elevator moves just a little bit and the same when i move elevator some movement on the aileron. I can't think of what to touch electronic, and mechanically the only thing i upgraded on the main rotor are shims behind the mixing arms.
Some advice? Regards!
RV 16 December 2020 06:3316.12.2020 06:33
Hmmm ... this is usually bound to 90 deg. lead at the blade/air on each heli. In flight it isn't 90 deg "fixed" due some physical effects - especially on larger scale helis.

So ... the swash is one thing - but physics doesn't care about the swash, it just is a question of correct phasing (which is usually 90deg on a 3d heli, sometimes a tad less)

So - do you mention something in flight? - If not - all okay.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G. 16 December 2020 09:0216.12.2020 09:02
Hi,

as in your other thread, I'd be curious about your overall setup.

You should not see any interaction on the swash plate, at least in setup mode.

One thing you could test: swap servo wires (aileron left/right, CH2/3), reverse the servos (elevator directions will then be reversed, but doesn't matter for a test on the ground) and see if the effect remains the same, or if it changes, too.

What shims behind mixing arms do you mean, please?

Kind regards

Eddi

Born to fly ...
forced to work.
Marianovbar 16 December 2020 20:2716.12.2020 20:27
Hi eddie. Yes, in flight i note that when i give fast aileron inputs shows a little of elevator and when give elevator the same happens with aileron.
I attached the file of my setup.
I received an advice from some pilots for putting a shim between the mixing arm of the main rotor and the yoke, the reason is to have the mixing arm aligned, i don't know if that is the issue or if also make some difference in flight. i tried to send you a photo but file size is to big.
Regards. Dateianhänge:
öffnen | Download - 11001637_vbar_LOGO_700.vbr (2.3 KB)
Eddi E. aus G. 17 December 2020 10:4617.12.2020 10:46
Hi,

did you make the change (shim) to address the issue, or did the issue only occur afterwards?

Do you see that interaction also on the bench, or does it only happen in flight?

It's totally uncommon, und pod-n-boom type helicopters, this is why I'm asking so much :-)

I've only loaded the file into the computer software for a quick glance, so I can only speak for bank 1, but gain and style are pretty low.
On a 700 I'd expect gains of 90-100 possible, and the higher you dial in Style, the more precise everything is.

Kind regards

Eddi

Born to fly ...
forced to work.
Marianovbar 17 December 2020 18:4817.12.2020 18:48
The problem began when i change from mini vbar to vbar neo, i changed the shims just to test if there is some difference on flight but i did not see any changes. I saw some setup from other mikado pilots and i did not saw higher gain values. I will test higher gain and see if something changes. Later i will attach you bank 2 and 3.
Regards
Marianovbar 17 December 2020 21:5117.12.2020 21:51
here is Dateianhänge:
öffnen | Download - 11001637_vbar_LOGO_700BANK2.vbr (2.3 KB)
Marianovbar 17 December 2020 21:5117.12.2020 21:51
and bank 3 Dateianhänge:
öffnen | Download - 11001637_vbar_LOGO_700bank3.vbr (2.3 KB)
Eddi E. aus G. 21 December 2020 09:0621.12.2020 09:06
Hi,

any news from real flight testing?

Tbh I hardly ever use foreign setups, I start with default and make the adjustments for my machine with my components and for my style of flying.
And that's—again—usually default plus slightly increased tail rate so the tail feels more in sync with flip/roll rates (for my taste).

In your case, upping gain and style would be my first attempt at it, and probably upping heli size a bit (default 50, try 70).

Could also be that you are particularly sensitive to such an effect, or that—for whatever reason—your heli is behaving different, so two more things to try would be a) to see if I can find the source, swap two servos or b) to adjust for the residual effect use swash plate rotation, start with 5° _into_ the direction the model rolls when you apply elevator.

Again, it's nothing common, so it's a bit like fishing in muddy waters.
But since it's not common, I would not suspect the VBar in general.

Kind regards

Eddi

Born to fly ...
forced to work.
Marianovbar 11 January 2021 01:5011.01.2021 01:50
Hi Eddie. i tested today more gain, style, heli size and still doing the same. i rotate the swashplate degrees and nothing changes too. I really don't know if it's mechanical or some vbar parameter. But the only thing i noted is that this issue i only have it with vbar neo, with minivbar i give aileron and is perfectly straight no elevator is mixed, when i changed to vbar neo both logo 700 that i have do the same. I don't know if u want a video to see more specifically.
Regards!
Eddi E. aus G. 11 January 2021 09:0011.01.2021 09:00
Hi,

well, a video might help. It's always difficult to troubleshoot from remote.

I don't know if you already tried, but I'd start over with a generic setup, basically just go through the setup assistant, new setup, trim, adjust collective, cyclic, tail, and try. To make sure it's not setup related.
If this was a general problem, you'd read about it all the time.

Then, if the swash plate moves neutral to all axis, elevator with no aileron tilt, aileron with no elevator tilt, collective from min to max without any tilt (adjust for servo synchronization with min/max trim if necessary, but usually never necessary because modern servos—of the same batch or not, but of the same type—are supposed to always have equal travels), all should be well here.

Now _if_ the modification to the head messes with the 90° leading edge control (arms too short or too long), that _could_ cause such offsets.

There are always dynamic offsets (phasing), depending on the AoA of the blades and the load, but on trainer type helicopters which react almost with no lag, this does not matter. On large/heavy/more insert scale helicopters, you'd adjust for it using electronic swash plate rotation, but hardly ever on trainers (even on the 800 XX or similarly large and heavy ships).

Kind regards

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless