Rolf Rakette
1 February 2026 11:5601.02.2026 11:56
Have a nice day!
I have a question about the old 800 XXtreme.
Can the main gear with freewheel simply be reversed in the mechanism so that the rotor's direction of rotation changes from right to left?
Should the pinion gear on the motor also be used accordingly, or is there a problem with the helical teeth?
I'm not sure about the arrow-shaped teeth...
Thank you so much for your efforts.
Greetings
Rolf
Wünsche schönen Tag,
hätte da mal eine Frage zu dem alten 800er XXtreme.
Kann man dort das Hauptzahnrad mit Freilauf einfach umdrehen in der Mechanik das sich die Rotordrehrichtung von rechts auf links wechselt?
Das Ritzel am Motor auch entsprechend oder spricht da was wegen der Pfeilverzahnung dagegen??
Bin mir da nicht sicher wegen der Pfeilverzahnung...
Vielen Dank für Eure Mühe.
Grüße
Rolf
RV
1 February 2026 14:0701.02.2026 14:07
Yes, that's possible - Uli always flew his models "left" in this way.
But... technically it would be better to simply press the freewheel mechanism into the hub – if you can do it ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Ja das geht - Uli hat seine Modelle auf diese Weise immer "links" geflogen.
Aber ... technisch besser wäre es nur den Freilauf in der Nabe dazu umzupressen - wenn man kann ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Rolf Rakette
1 February 2026 14:1601.02.2026 14:16
Hello Rainer,
Thanks for the reply. The problem is pressing the freewheel in and out.
I don't have the right tool for that.
Alternatively, one could rotate the entire freewheel with the hub in the gear.
However, this would have the disadvantage that the recesses in the gear itself would be in the wrong place.
The material would be quite thin there.
I'll see how I do that... Maybe it will stay on the right.
It wouldn't be suitable for that model.
Greetings and have a nice Sunday.
Rolf
Hallo Rainer,
danke für die Antwort. Das aus und einpressen vom Freilauf ist halt das Problem.
Dafür habe ich kein passendes Werkzeug.
Alternativ könnte man noch den kompletten Freilauf mit Nabe im Zahnrad drehen.
Hätte aber den Nachteil das die Senkungen im Zahnrad selber an der falschen stelle wären.
Dort wäre dann das Material recht dünn.
Ich schau mal wie ich das mache.. Vielleicht bleibt es auch bei Rechts.
Wäre nur zu dem Modell dann nicht passend.
Grüße und schönen Sonntag noch.
Rolf