Lovelight
21 December 2022 19:5721.12.2022 19:57
After many years off, I’m planning on getting back into the Heli addiction. I have an old Logo 400SE FBL and wanted to ask if there is a pathway to 480 or if I should just start with a new kit. My plan was to knock the rust off with the 400 until I can’t find any more replacement parts or maybe upgrading over time like stretch with longer boom+tail rotor and then move to frames+head+gearing. Not flying 3D yet so thinking that my old digital servos and ESC can keep me going for a while.
Thanks in advance for your guidance and advice.
Eddi E. aus G.
22 December 2022 09:0422.12.2022 09:04
Hi,
480 is completely different, no way to just exchange a couple of parts now and then, and continue.
This is mainly because of the different belt drive, 400 SE with intermediate gear, 480 with continuous belt.
I'd probably stick with the 400 SE until there's a major upgrade opportunity (sad enough :-) ), then get a 480 kit.
Most of the components can be taken over, of course, although I'm not sure if your 400 motor would fit, depending on which one you have now.
Kind regards
Eddi
Born to fly ...
forced to work.
Lovelight
22 December 2022 20:1422.12.2022 20:14
Thanks Eddi. That’s kind of what I’ve come to figure out and makes total sense. But there is a “pathway” so to speak for me. I had to order a new ESC and ended up picking the Tribunus 80A before plans to consider at the 480. It’s borderline but should work fine with the 4015-1070 that I’ll eventually get. I will probably replace the current motor with the 4015-1070 and the servos in the 400SE should work fine to start in the 480. I’m not pushing this thing very hard.
I’ll just fly the 400 until I break a part that can’t be replaced and then move the electronics over to a 480. If I blow up the tail somehow on the 400, it looks like I can rebuild with the one from the 480 and use it for spares when I step up to the full kit. So it’s not as simple as just add a “longer tailboom” pathway between the 400 and 480 but seems like it won’t be a complete flatten and rebuild with new parts all around. Appreciate the response and really looking forward to getting airborne again.
Eddi E. aus G.
29 December 2022 09:0629.12.2022 09:06
Hi,
of course many parts are the same, I mean, we have a modular design anyways.
For the 400/480, imo a 65 A ESC is perfectly sufficient, until you push the envelope too hard, but that's at least what the 400 /SE is not designed for, it was designed for the power trains which were current back in it's day :-)
—Eddi
Born to fly ...
forced to work.