← Logo 400 ... 690

Logo 480XXtreme: The tail servo automatically moves to the other side!

Mikado Model Helicopters › Logo 400 ... 690 · Started by johnpap on 19 May 2024 14:1319.05.2024 14:13
johnpap 19 May 2024 14:1319.05.2024 14:13
Hello,
When flight the tail moves automatically, makes the helicopter fast rotate automatically, very scary and dangerous.

https://youtu.be/LmarbbbRjuM

Logo 480XXtreme
Tail servo: Savox SH-1290MG
vbar neo vlink (with last update)
vbar control classic
YGE 95LVT
Motor stock

Thank you



Edited 3 time(s). Last edit at 05/19/2024 03:59PM by johnpap.
RV 19 May 2024 20:3819.05.2024 20:38
What you see here on your video is quiet normal.´

The tail servo moves a tiny bit depending on the vibtations and must be centered manually (move stick until the tail doesn't have thrust in one direction, just watch the boom on the ground) before takeoff.

is there any other issue in flight?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
johnpap 19 May 2024 22:1919.05.2024 22:19
ok with the video since it's normal.

The problem is when in flight the tail moves automatically, it makes the helicopter rotate automatically up to 180 degrees.



Edited 1 time(s). Last edit at 05/19/2024 10:19PM by johnpap.
RV 20 May 2024 09:3220.05.2024 09:32
Okay - please post some screenshot of the tail settings in VBC setup and flight panels as well as a photo of the NEO mounting and the tail rotor (Top dowm with blades).

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
johnpap 25 May 2024 18:4725.05.2024 18:47
Sorry for the delay, I didn't have time.

Attachments:
open | download - log files.zip (4.1 KB)
RV 25 May 2024 23:0925.05.2024 23:09
Thanks for the screenshots and files.

Unfortunately there is no real hint for the tail issue. So we come down to 3 points:

First - please ensure everything is mechanically running smooth. Check tail slider as well as e.g. thrust bearings in tail rotor for correct orientation (inner diameter is different)

Second - run the vibration analyzer (run heli with 0 deg on the ground) and take some screenshots (there is a app ...) - upload them. We'll see if there is any vibration, the Logo 400 tail drive gear mesh is sometimes a bit of a challenge ...

Third - ensure your servo has enough thrust to move the tail slider when the heli is running. I personally always used a standard size one as the midis are on the edge for the 400 here.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
johnpap 26 May 2024 09:3326.05.2024 09:33
Thank you very much for the help, which servo do you recommend?
RV 26 May 2024 09:5626.05.2024 09:56
Hmmm ... i had a look again and i might be wrong in 2points:

- i think this heli has already a standard size servo, so this one should work.
- the 480 (was on the 400 in my mind) has no tail gear, it has one belt only - so ithe mesh won't be a issue)

Please check the mechanics and also to be sure run the vibration analyzer.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless