{"ok":true,"content":"Hi,<br><br> A little trial and error: firstly, in the servo monitor, are all channels being moved by the corresponding transmitters? If not, check the transmitter to make sure everything is assigned correctly.<br><br> Then check in the VBar software that the corresponding channels are being addressed.<br><br> The control functions are self-explanatory.<br><br> For example, one could use the throttle channel as a throttle line together with flight phases in the transmitter for bank switching, the gyro channel for the gyro sensitivity (which can then be switched in sync with the flight phases\/banks, with different percentage values), the landing gear channel for the motor switch, and the AUX channel for the rescue system, or vice versa.<br><br> Youth research... hoppi galloppi :-) \r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}