{"ok":true,"content":"Hello,<br> First of all, a big thank you! The Neo has now connected to the PC. :-) I have no idea why it didn&#39;t work the last few times.<br><br> Now I have the following problem.<br><br> Receiver: Jeti Duplex R9. New software is installed. UDI12 should be configured.<br><br> I have now connected the receiver to the Neo.<br> Cabling: AUX1 of the Neos goes to slot 9 on the receiver.<br> The controller patch cable goes to receiver slot 1.<br><br> Nothing else needs to be connected, right? (Except for the servos, of course.)<br><br><br> After initialization, the Neo flashes red\/green and has no connection.<br><br> The following was done in the software:<br> New setup generated<br> In the receiver tab, I switched to UDI and entered the number for Pitch Roll Nick &amp; Tail that is also in the remote control under servo assignment.<br><br> Thanks!","note":"machine-translated from German"}