{"ok":true,"content":"Hello.<br><br> Everything was normal before the update to Rescue.<br><br> Now, after the update, ICC can no longer understand something:<br> Nullpitch is no longer correct...<br><br> Transmitter settings checked (bars -100\/0\/+100 are correct), Jeti DC 24 transmitter with REX6 receiver connected to UDI input<br><br> Switch configuration is correct for rescue only.<br><br> Regarding the pitch:<br> Trim in setup exactly to 0\u00b0 then pitch setting +-12.5<br> The pitch stick has a small detent in the middle, and this is set exactly to 0 in the transmitter settings...<br><br> So the stick stays in the middle, and when closing the setup menu to the normal menu, the pitch jumps to +2.5 degrees!!??<br> Pitch then +15 and -10<br><br> Checked 20 times...<br><br> And no, rescue services are not active.<br><br> What could be there?<br><br> That wasn&#39;t the case before the update.<br><br> Regards, Florian","note":"machine-translated from German"}