{"ok":true,"content":"Hi Chris,<br><br> If no more data is received from the receiver (which _should_ be the case by definition), the VBar logs packet loss (immediately, on the first, on one) and after 0.2 seconds without packets, failsafe occurs. Lights off, door closed, servos remain in the last received position (hold), motor off.<br> It doesn&#39;t matter whether the receiver&#39;s failsafe is deactivated or whether the receiver is unplugged.<br><br> As soon as even one package comes in, it will be processed\/used.<br><br> If the receiver has failsafe programmed, it will still send a signal to the servos, or in this case to the VBar, even if the signal is lost \u2013 namely, the signal you programmed. The VBar won&#39;t detect this because it doesn&#39;t know whether you&#39;re no longer controlling anything (essentially in hold mode) and have switched off the motor, or whether the receiver is doing this automatically based on its programming.<br> A valid input signal is a valid input signal.<br><br> For example, if you had connected the controller to the receiver using a third-party receiver, you would also have to deal with fail-safe; the VBar _doesn&#39;t know this_, and it has no way to intervene.<br><br> Once everything is connected to the VBar, with the controller connected to ESC (VBar motor logic) or AUX3 (bypass), the VBar takes care of everything.<br><br> If you program fail-safe functionality directly into the receiver, you also need to consider what makes sense.<br><br> And... test it ;-) \r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}