{"ok":true,"content":"Good morning,<br><br> It&#39;s like asking whether my soup is too spicy or too salty :-) To a certain extent, you can answer that, but it&#39;s also a matter of taste or habit...<br><br> Using bank two as an example, it&#39;s more or less a standard setup (aerobatics\/3D), the tail sensitivity from the transmitter seems quite high to me at 110, the RPM seems to be passed through from the transmitter via AUX3, which I can&#39;t see.<br><br> The setup itself looks good except for the +\/- 50 trim on all servos; this could be mechanically improved by rotating the servo arm by one notch and trimming closer to zero, but as long as everything works as it should, this would be more cosmetic than necessary.<br><br> So... if it&#39;s too nimble\/agile\/twitchy for you, turn down the maneuverability and the tail yaw rate. If it&#39;s still too sluggish, turn them up.<br> Since you are flying with a third-party transmitter, also pay attention to Dual Rate \/ Expo in the transmitter; they do essentially the same thing, but on top of that.<br><br> If it clicks into place too softly or imprecisely, try more sensitivity; if it starts to bounce back, try less.<br><br> Actually quite simple :-) \r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}