{"ok":true,"content":"Hi Eddie, I hope you have an idea about my problem...<br><br> I sold a NEO Pro Rescue with FW v6.4.48, which I had bought between 2015 and 2017 and which worked perfectly for me until it was removed (I still have 3 more in use myself).<br><br> The very helpful buyer reported that the NEO keeps switching off after just a few minutes. It&#39;s installed in a Goblin 570 with a Kontronik Jive 120 ESC and Graupner HV servos. He&#39;s also using a 2S backup battery (which, in my opinion, isn&#39;t ideal with a Jive 120, since the BEC only supports up to 6V and current could flow into the BEC, unless the Jive BEC is protected by a diode). In any case, all tests and attempts, even with just the battery and without the BEC, have been unsuccessful. The power supply was also connected to other connectors, such as servo 4, without any change.<br><br> Nothing seems to be found in the logs either. The NEO apparently no longer has time to log anything.<br><br> Is there anything known that can cause a NEO to shut down, even if the NEO itself is working properly and the power supply is good?<br><br> Before I take the NEO back, I would be very grateful for any advice that might solve the problem.<br><br> Greetings,<br> Bernd<br><br><br><br> Edited 5 times. Last edited on 15.06.2021 at 05:55 by Spaceman.<br><br>","note":"machine-translated from German"}