{"ok":true,"content":"Hi Eddi,<br><br> I received my Touch today and immediately switched to Mode 1 and also updated to Pro.<br> Some of the screw heads are of poor quality, not properly stamped or something like that (I took a photo).<br> but that&#39;s not the topic.<br> The following:<br> I wanted to bind the VNeo without mounting the flight batteries (I&#39;ve done this many times before and it always worked), and since all the inputs are occupied, I connected a NiMH battery to the + and - terminals on the sensor. The Neo is now only glowing orange. Did I brick the device? Is the data from the tandem still there?<br> Or has RV still saved them in case of the worst-case scenario?<br><br> What to do?<br><br> Regards, Kalle","note":"machine-translated from German"}