{"ok":true,"content":"Hello Karlheinz,<br><br> You can bind and fly the helicopter with a classic transmitter, and also make the generic settings such as maneuverability, sensitivity, etc.<br> You can also make all the settings, but only directly in the macro cells (= free mixers, to put it simply).<br> Only the Touch version has the app (setup interface) that allows you to set up a tandem or a Flettner in a quasi-user-guided manner.<br><br> VBar NEO can output SBUS, so VBasic could be a normal 9-channel receiver with SBUS output.<br> The transmitter uses its own VLink protocol, not FASST or Futaba FHSS... we&#39;re all doing our own thing :-)<br><br> Potless, no. We consciously chose potentiometers 7 years ago, and time has shown that it was absolutely the right decision :-)<br> These things just work, even in the oldest transmitters that have been flown by team pilots for years and thousands of flights + simulator use :-)<br><br> Set it up, correctly, mode, switch assignment, bind, pre-flight check, and off you go. The &#39;deflections&#39; (look that up in Pschyrembel&#39;s manual... gruesome pictures...) are set and saved in the VBar; the helicopter flies exactly as configured. Bind and fly.\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.<br>\n<br>\n<br>\n<br>\n1 mal bearbeitet. Zuletzt am 22.06.2021 15:10 von Eddi E. aus G..","note":"machine-translated from German"}