{"ok":true,"content":"Okay, thanks for your patience.<br><br> However, only the values 70 and 80 in the display change during the bank transfer; the bars to the left of them do nothing.<br><br> Is the Neo control loop different at, for example, 70 than at 80?<br><br> This also clearly means that with a third-party transmitter, if the controller is connected to the ESC, I have to set my desired RPM (70\/80) in the bank.<br><br> If that&#39;s the case, I don&#39;t know if, for example, 45% of the throttle position (servo travel) on the transmitter corresponds to 1600. I&#39;m wondering if, in bank 2, if I enter 45%, the actual output will be 1600.<br> or ?","note":"machine-translated from German"}