{"ok":true,"content":"Hi,<br><br> Basically exactly the same.<br><br> Channel number 5 in this case switches (!*) between -100...0...+100 (yellow-nothing-blue) the banks 1-2-3 (is also displayed).<br> External controller, OK, the controller runs in its own governor mode (e.g. Kontronik Mode 4) and receives throttle values for each bank, e.g. 70-80-90% in bank 1-2-3 (previously: throttle curves, but then you had to individually adjust at least 2-7 points to the same height for a throttle straight line... when you only need one holding point).<br><br> C&#39;est \u00e7a.<br><br> Greetings<br><br> Eddie<br><br> (!*) If you had a throttle stick, slider, or potentiometer here, the function would also switch hard; the channel would be roughly divided into thirds, i.e., -100...-33\/-33...+33\/+33...+100 would be the &#39;windows&#39; where it snaps into place.<br><br> Born to fly ...<br> forced to work.<br><br><br><br> Edited once. Last edited on 04\/08\/2021 at 14:11 by Eddi E. from G.<br><br>","note":"machine-translated from German"}